Next-in-Thread Next Message

Question ThinkPad 570 & 3com 575BT 

Forum: 3Com PCMCIA Ethernet Adapter Issues
Date: 1999, Nov 04
From: Michal Roszkowski michal

This question is in regards to a thinkpad 570 with a 3com 575bt ethernet pc_card running redhat 6.1 and kernel 2.2.13

when my 3com card is in the machine, i cannot seem to do anything to configure it. I simply get: cs: socket 1 timed out during reset

however, when i physically remove and insert the card when cardmgr is running, i get the 2 beeps and the card is configured without any problems at all... and it works fine until i suspend... then it gives me the same error... i have to remove and insert it again...

can someone please give me some ideas as to what the problem may be and how to go about resolving it.

these are the messages i get on unsuccessful then successful card configuration:

Nov  4 16:42:57 erik kernel: Linux PCMCIA Card Services 3.1.3 
Nov  4 16:42:57 erik kernel:   kernel build: 2.2.13 #2 Thu Nov 4 14:44:54 CET 1999 
Nov  4 16:42:57 erik kernel:   options:  [pci] [cardbus] [apm] 
Nov  4 16:42:57 erik kernel: Intel PCIC probe:  
Nov  4 16:42:57 erik kernel:   TI 1450 PCI-to-CardBus at bus 0 slot 2, mem 0x50000000, 2 sockets 
Nov  4 16:42:57 erik kernel:     host opts [0]: [ring] [pwr save] [serial pci & irq] [no pci irq] [lat 64/176] [bus 3/5] 
Nov  4 16:42:57 erik kernel:     host opts [1]: [ring] [pwr save] [serial pci & irq] [no pci irq] [lat 64/176] [bus 6/8] 
Nov  4 16:42:57 erik kernel:     ISA irqs (scanned) = 3,4,5,7,9,10,15 status change on irq 15 
Nov  4 16:42:57 erik cardmgr[2371]: starting, version is 3.1.3
Nov  4 16:42:57 erik cardmgr[2371]: watching 2 sockets
Nov  4 16:42:57 erik kernel: cs: IO port probe 0x1000-0x17ff: excluding 0x1000-0x104f 0x15e8-0x15ef 
Nov  4 16:42:57 erik kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x3b8-0x3df 0x4d0-0x4d7 
Nov  4 16:43:01 erik kernel: cs: socket 1 timed out during reset 

******* <- card physically removed/inserted here...

Nov  4 16:43:05 erik kernel: cs: cb_alloc(bus 6): vendor 0x10b7, device 0x5157 
Nov  4 16:43:05 erik cardmgr[2371]: initializing socket 1
Nov  4 16:43:05 erik cardmgr[2371]: socket 1: 3Com 3CCFE575B/3CXFE575B Fast EtherLink XL
Nov  4 16:43:05 erik cardmgr[2371]: executing: 'insmod /lib/modules/2.2.13/pcmcia/cb_enabler.o'
Nov  4 16:43:05 erik cardmgr[2371]: executing: 'insmod /lib/modules/2.2.13/pcmcia/3c575_cb.o'
Nov  4 16:43:05 erik kernel: 3c59x.c:v0.99L 5/28/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html 
Nov  4 16:43:05 erik kernel: cs: cb_config(bus 6) 
Nov  4 16:43:05 erik kernel:   fn 0 bar 1: io 0x100-0x17f 
Nov  4 16:43:05 erik kernel:   fn 0 bar 2: mem 0x60021000-0x6002107f 
Nov  4 16:43:05 erik kernel:   fn 0 bar 3: mem 0x60020000-0x6002007f 
Nov  4 16:43:05 erik kernel:   fn 0 rom: mem 0x60000000-0x6001ffff 
Nov  4 16:43:05 erik kernel: vortex_attach(bus 6, function 0, device 5157) 
Nov  4 16:43:05 erik kernel: eth0: 3Com 3CCFE575 Cyclone CardBus at 0x100,  00:50:04:94:7a:db, IRQ 9 
Nov  4 16:43:05 erik kernel: eth0: CardBus functions mapped 60020000->c4071000 
Nov  4 16:43:05 erik kernel:   8K byte-wide RAM 5:3 Rx:Tx split, MII interface. Nov  4 16:43:05 erik kernel:   MII transceiver found at address 0, status 7809. Nov  4 16:43:05 erik kernel:   Enabling bus-master transmits and whole-frame receives. 
Nov  4 16:43:05 erik cardmgr[2371]: executing: './network start eth0'
Nov  4 16:43:06 erik pumpd[2408]: starting at Thu Nov  4 16:43:06 1999  
Nov  4 16:43:09 erik pumpd[2408]: configured interface eth0
Nov  4 16:43:09 erik cardmgr[2371]: + Determining IP information for eth0... done.

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. More but... by Michal Roszkowski, 1999, Nov 04

Add Message to: "ThinkPad 570 & 3com 575BT"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10