Bridge mode = PCIC, I think 

Forum: 3Com PCMCIA Ethernet Adapter Issues
Re: Question: 3CCFE575BT-D Not Detected (Paul Offord)
Date: 1999, Dec 28
From: David Hinds <dhinds@pcmcia.sourceforge.org>

Your PCMCIA bridge must be set to "PCIC mode" in your BIOS setup. In this mode, the bridge will completely ignore CardBus cards. Go into your BIOS settings and change it to "auto" or "cardbus" mode. -- Dave

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. Ok: PC Card Controller Mode = CardBus/16-bit fixed the problem by Paul Offord, 1999, Dec 30

[ Add Message ]  to: "Bridge mode = PCIC, I think"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]