Next-in-Thread Next Message

Question 3CCFE575BT-D and RH 6.1 on Inspiron 3500 

Forum: 3Com PCMCIA Ethernet Adapter Issues
Date: 1999, Dec 29
From: Peter Kimball yawhcihw

hi all

I'm a linux newbie, trying to get the above card to work on my system. when PCMCIA initializes at boot time, I get a hi then low beep, ie card recognized but not configured (i think). The system log, which I can't directly copy here (newbie idiocy..i can't mount a dos floppy) goes something like this:

cardmgr[332]: starting, version is 3.0.14 cardmgr[332]: watching 2 sockets

kernel: cs: IO port probe 0x100-0x17ff: clean.
kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x130-0x137 0x220-0x22f 0x320-0x327 0x388-0x38f 0x4d0-0x4d7
kernel: cs: IO port probe 0x0a00-0x0aff: clean
cardmgr[332]: initializing socket 0 cardmgr[332]: socket 0: 3Com 3CCFE575B/3CXFE575B Fast EtherLink XL rc: Starting pcmcia succeeded cardmgr[332]: executing: 'insmod /lib/modules/2.2.12-20/pcmcia/cb_enabler.o' cardngr[332]: executing: 'insmod /lib/modules/2.2.12-20/pcmcia/3c575_cb.o'
kernel: 3c59x. c:v0.99L 5/28/99 Donald Becker
kernel: cs: cb_config(bus 32): vendor 0x10b7, device 0x5157
kernel:    fn 0 bar 1: io 0x280-0x2ff
kernel:    fn 0 bar 2: mem 0x60021000-0x6002107f
kernel:    fn 0 bar 3: mem 0x60020000-0x6002007f
kernel:    fn 0 rom: mem 0x60000000-0x6001ff
kernel: cs: could not allocate interrupt for CardBus socket 0
kernel: 3c575_cb: RequestIO: Out of resource
inet: inetd startup succeeded

thanks for any and all help


Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None More info? by David Hinds, 1999, Dec 30
2. News Resolved, methinks! by Peter Kimball, 1999, Dec 31
3. Sad 3CCFE575BT-D and RH 6.1 on Inspiron 3500 Redux by Gregory Ade, 2000, Apr 21
1. Ok I think I may have it fixed... by Gregory Ade, 2000, Apr 21

Add Message to: "3CCFE575BT-D and RH 6.1 on Inspiron 3500"

Members Subscribe Admin Mode Show Frames Help for HyperNews at 1.10