Next-in-Thread Next Message

None Different problems with 3.1.8 

Forum: 3Com PCMCIA Ethernet Adapter Issues
Re: Sad 3c575TX on Thinkpad i1452
Re: None The usual: please include system log messages (David Hinds)
Date: 2000, Jan 06
From: johnny

Jan  6 12:54:16 localhost kernel: Intel PCIC probe:
Jan  6 12:54:16 localhost kernel:   O2Micro OZ6832/OZ6833 PCI-to-CardBus at bus
0 slot 19, mem 0x68000000, 2 sockets
Jan  6 12:54:16 localhost kernel:     host opts [0]: [a 44] [b ad] [c 20] [d 06] [mhpg 18] [fifo 00] [e 28] [pci irq 9] [lat 32/176] [bus 32/34]
Jan  6 12:54:16 localhost kernel:     host opts [1]: [a 44] [b ad] [c 20] [d 06] [mhpg 18] [fifo 00] [e 28] [pci irq 9] [lat 32/176] [bus 35/37]
Jan  6 12:54:16 localhost kernel:     ISA irqs (default) = 3,11 polling interval = 1000 ms
Jan  6 12:54:16 localhost pcmcia:  cardmgr.
Jan  6 12:54:16 localhost rc: Starting pcmcia succeeded
Jan  6 12:54:16 localhost cardmgr[340]: starting, version is 3.1.8
Jan  6 12:54:17 localhost cardmgr[340]: watching 2 sockets
Jan  6 12:54:17 localhost kernel: cs: IO port probe 0x1000-0x17ff: clean.
Jan  6 12:54:17 localhost kernel: cs: IO port probe 0x0100-0x04ff: clean.
Jan  6 12:54:17 localhost kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Jan  6 12:54:17 localhost inet: inetd startup succeeded
Jan  6 12:54:17 localhost kernel: cs: cb_alloc(bus 32): vendor 0x10b7, device 0x5057
Jan  6 12:54:17 localhost cardmgr[340]: initializing socket 0
Jan  6 12:54:17 localhost cardmgr[340]: socket 0: 3Com 3c575-TX Fast EtherLink XL
Jan  6 12:54:17 localhost cardmgr[340]: executing: 'insmod /lib/modules/2.2.12-20/pcmcia/cb_enabler.o'
Jan  6 12:54:17 localhost cardmgr[340]: executing: 'insmod /lib/modules/2.2.12-20/pcmcia/3c575_cb.o'
Jan  6 12:54:17 localhost kernel: 3c59x.c:v0.99L 5/28/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
Jan  6 12:54:17 localhost kernel: cs: cb_config(bus 32)
Jan  6 12:54:17 localhost kernel:   fn 0 bar 1: io 0x100-0x13f
The ethernet card gets picked up, and I can start the intercace and ping it, but can't ping out:

Jan  6 12:54:17 localhost kernel:   fn 0 rom: mem 0x60000000-0x6000ffff
Jan  6 12:54:17 localhost kernel: vortex_attach(bus 32, function 0, device 5057)
Jan  6 12:54:17 localhost kernel: eth0: 3Com 3c575 Boomerang CardBus at 0x100,
00:60:08:b7:89:fa, IRQ 3
Jan  6 12:54:17 localhost kernel:   8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface.
Jan  6 12:54:17 localhost kernel:   MII transceiver found at address 0, status 7809.
Jan  6 12:54:17 localhost kernel:   Enabling bus-master transmits and whole-frame receives.
Jan  6 12:54:17 localhost cardmgr[340]: executing: './network start eth0'

And then, after trying to ping another machine, I got this on the console:

Jan 6 13:06:41 localhost kernel: eth0: transmit timed out, tx_status 00 status e601. Jan 6 13:06:41 localhost kernel: eth0: Interrupt posted but not delivered -- IRQ blocked by another device?

Also, the modem stopped working after upgrading to 3.1.8, event when the ethernet card isn't in the machine. It looks as if the serial module loads correctly, and there are no errors reported in /var/log/messages, but minicom and chat fail to see it.

Chat: Can't get terminal parameters Input/output errors.

Thanks,

jds

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None One thing to try by David Hinds, 2000, Jan 06
(_ Sad nope... by johnny, 2000, Jan 06

Add Message to: "Different problems with 3.1.8"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10