[ Next-in-Thread ]  [ Next Message ] 

Question: Dell Latitude CPi, 3ccfe575ct almost works 

Forum: 3Com PCMCIA Ethernet Adapter Issues
Date: 2000, Jan 29
From: lgoodbar

Running RedHat 6.0 stock (kernel 2.2.5-15) and cardmgr version 3.0.9.

I almost have this card set up. I added the following to options: 

card "LAN Cardbus Card"
  version "3Com Corporation", "3CCFE575CT"
  bind "3c575_cb"

I used LinuxConf to assign hostname, IP address and netmask.

I get 2 high beeps, and ifconfig shows eth0 bound to the card.

HOWEVER, I run a 10base network, and this card is 10/100. I have no light on my hub for this card. Is there a config option to force 10Mb transmission?

Thanks! Loyd

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. Not quite as close as you think by David Hinds, 2000, Jan 29
(_ Question: Untitled by lgoodbar@watervalley.net, 2000, Jan 29
(_ More: Sill not there by lgoodbar@watervalley.net, 2000, Jan 29
(_ More: I think I'm there but... by lgoodbar@watervalley.net, 2000, Jan 29
(_ Re: More: I think I'm there but... by David Hinds, 2000, Jan 30

[ Add Message ]  to: "Dell Latitude CPi, 3ccfe575ct almost works"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]