Next-in-Thread Next Message

More I think I'm there but... 

Forum: 3Com PCMCIA Ethernet Adapter Issues
Re: Question Dell Latitude CPi, 3ccfe575ct almost works
Re: None Not quite as close as you think (David Hinds)
Re: Question Untitled
Re: More Sill not there
Date: 2000, Jan 29
From: lgoodbar

I have some basic networking now!

After Linux boots, I run the following commands:

 route add 192.168.164.8 eth0
 /etc/rc.d/init.d/routed restart

Now I can ping and receive pings from the network.

However, the first two receives and sends take an abnormally long time to complete. After that, everything is in the 1.0-2.0 ms range. Is that normal?

 [root@callisto /]# ping 192.168.164.1
 PING 192.168.164.1 (192.168.164.1): 56 data bytes
 64 bytes from 192.168.164.1: icmq_seq=10 ttl=64 time=205.8 ms
 64 bytes from 192.168.164.1: icmq_seq=9 ttl=64 time=1214.8 ms
 64 bytes from 192.168.164.1: icmq_seq=11 ttl=64 time=1.0 ms
 64 bytes from 192.168.164.1: icmq_seq=12 ttl=64 time=1.1 ms
 64 bytes from 192.168.164.1: icmq_seq=13 ttl=64 time=1.0 ms

I get similar results from the machine pinging this one.

 [root@leda /]# ping 192.168.164.8
 PING 192.168.164.8 (192.168.164.8): 56 data bytes
 64 bytes from 192.168.164.1: icmq_seq=2 ttl=255 time=783.7 ms
 64 bytes from 192.168.164.1: icmq_seq=1 ttl=255 time=1784.3 ms
 64 bytes from 192.168.164.1: icmq_seq=0 ttl=255 time=2779.5 ms
 64 bytes from 192.168.164.1: icmq_seq=3 ttl=255 time=0.6 ms
 64 bytes from 192.168.164.1: icmq_seq=4 ttl=255 time=0.6 ms

Is the best bet to add the route and routed lines to /etc/rc.d/rc.local script? Or is there another, more relevant place to put this?

Thanks! Loyd

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None Re: More: I think I'm there but... by David Hinds, 2000, Jan 30

Add Message to: "I think I'm there but..."

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10