|
Up to v3.1.8 everything worked fine. Now, with versions 3.1.10 and 3.1.11, my 3CCFE575 card won't work due to 2 devices sharing a single IRQ.
The difference in working/not-working is soley the pcmcia-cs driver version. The kernel (v2.2.14) and pcmcia config are unchanged. This is the error I get with 3.1.1x:
eth0: transmit timed out, tx_status 00 status e601. eth0: Interrupt posted but not delivered -- IRQ blocked by another device? Sure enough, there 2 devices on IRQ 11! This is from v3.1.8:
# cat /proc/interrupts
CPU0
0: 9655 XT-PIC timer
1: 2 XT-PIC keyboard
2: 0 XT-PIC cascade
3: 257 XT-PIC eth0
5: 1 XT-PIC soundblaster
8: 2 XT-PIC rtc
12: 4 XT-PIC PS/2 Mouse
13: 1 XT-PIC fpu
14: 21425 XT-PIC ide0
15: 2 XT-PIC ide1
NMI: 0
And this is from v3.1.10:
# cat /proc/interrupts
CPU0
0: 12453 XT-PIC timer
1: 121 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 1 XT-PIC soundblaster
8: 2 XT-PIC rtc
11: 0 XT-PIC i82365, eth0
12: 4 XT-PIC PS/2 Mouse
13: 1 XT-PIC fpu
14: 21343 XT-PIC ide0
15: 2 XT-PIC ide1
NMI: 0
Any advice on how to get my Ethernet card work with the 3.1.1x drivers? Thank you.
|
Messages