|
Ok,
Well, i tinkered around with some files, and messed with other things, in a futile attempt to get the card to work. Well, as you can guess, it was a no-go, and i royally messed up my system. So i started all over, re-installed mandrake 7.0 fresh, and added the latest pcmcia support. I popped the card in, it didnt work. So i got all the logs i thought would be nessecary. here they are:
/var/log/messages Feb 8 15:09:24 deadpixel kernel: cs: cb_alloc(bus 32): vendor 0x10b7, device 0x6560 Feb 8 15:09:24 deadpixel cardmgr[369]: initializing socket 0 Feb 8 15:09:24 deadpixel cardmgr[369]: socket 0: 3Com 3CCFEM656B w/Winmodem Feb 8 15:09:24 deadpixel cardmgr[369]: executing: 'insmod /lib/modules/2.2.14-15mdk/pcmcia/cb_enabler.o' Feb 8 15:09:24 deadpixel cardmgr[369]: executing: 'insmod /lib/modules/2.2.14-15mdk/pcmcia/3c575_cb.o' Feb 8 15:09:24 deadpixel kernel: 3c59x.c:v0.99L 5/28/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html Feb 8 15:09:24 deadpixel kernel: cs: cb_config(bus 32) Feb 8 15:09:24 deadpixel kernel: fn 0 bar 1: io 0x880-0x8ff Feb 8 15:09:24 deadpixel kernel: fn 0 bar 2: mem 0x60023000-0x6002307f Feb 8 15:09:24 deadpixel kernel: fn 0 bar 3: mem 0x60022000-0x6002207f Feb 8 15:09:24 deadpixel kernel: fn 1 bar 1: io 0x800-0x87f Feb 8 15:09:24 deadpixel kernel: fn 1 bar 2: mem 0x60021000-0x6002107f Feb 8 15:09:24 deadpixel kernel: fn 1 bar 3: mem 0x60020000-0x6002007f Feb 8 15:09:24 deadpixel kernel: fn 0 rom: mem 0x60000000-0x6001ffff Feb 8 15:09:24 deadpixel kernel: vortex_attach(bus 32, function 0, device 6560) Feb 8 15:09:25 deadpixel kernel: eth0: 3Com 3CCFE656 Cyclone CardBus at 0x880, 00:50:04:95:a5:95, IRQ 10 Feb 8 15:09:25 deadpixel kernel: eth0: CardBus functions mapped 60022000->c287f000 Feb 8 15:09:25 deadpixel kernel: 8K byte-wide RAM 5:3 Rx:Tx split, MII interface. Feb 8 15:09:25 deadpixel kernel: MII transceiver found at address 0, status 7809. Feb 8 15:09:25 deadpixel kernel: Enabling bus-master transmits and whole-frame receives. Feb 8 15:09:25 deadpixel cardmgr[369]: executing: './network start eth0' Feb 8 15:09:40 deadpixel network: Bringing up device eth0 succeeded Bootlog Feb 8 15:08:23 deadpixel pcmcia: Starting PCMCIA services: Feb 8 15:08:23 deadpixel pcmcia: modules Feb 8 15:08:24 deadpixel pcmcia: cardmgr. Feb 8 15:08:24 deadpixel pcmcia: /etc/rc.d/rc3.d/S45pcmcia: ./network: No such file or directory Feb 8 15:08:24 deadpixel rc: Starting pcmcia succeeded /var/run/stab Socket 0: 3Com 3CCFEM656B w/Winmodem 0 network 3c575_cb 0 eth0 Socket 1: empty My problem is that the network active link comes up on my hub, but the card wont broadcast or recive any traffic. To be completely through, i even took a picture of my card which i can include if need be. -alex
|