[ Next-in-Thread ]  [ Next Message ] 

Question: Dell (3Com) 3CCFE575CT-D transmitter light missing 

Forum: 3Com PCMCIA Ethernet Adapter Issues
Date: 2000, Feb 29
From: Dennis Schafroth schafroth

Hi

I am running RH 6.1 on Dell 3700 with newly installed PCMCIA 3.1.11.

Every seems OK in the log, but there is still no tramitter light. ince it has been done, I must have forgotten something.

I haven't tried PnP BIOS setting in the PCMCIA module. Could that be an issue?

Regards Dennis Schafrothh

/var/log/messages: 

> Feb 29 00:37:09 localhost pcmcia: Starting PCMCIA services:
> Feb 29 00:37:09 localhost pcmcia:  modules
> Feb 29 00:37:09 localhost kernel: Linux PCMCIA Card Services 3.1.11 
> Feb 29 00:37:09 localhost kernel:   kernel build: 2.2.12-20 #1 Mon Sep 27 10:40:35 EDT 1999 
> Feb 29 00:37:09 localhost kernel:   options:  [pci] [cardbus] [apm] 
> Feb 29 00:37:09 localhost kernel: PCI routing table version 1.0 at 0xfbd70 
> Feb 29 00:37:09 localhost kernel:   00:03.0 -> irq 11 
> Feb 29 00:37:09 localhost kernel:   00:03.1 -> irq 11 
> Feb 29 00:37:09 localhost kernel: Intel PCIC probe:  
> Feb 29 00:37:09 localhost kernel:   TI 1225 PCI-to-CardBus at slot 00:03, mem 0x68000000 
> Feb 29 00:37:09 localhost kernel:     host opts [0]: [ring] [serial pci & irq] [pci irq 11] [lat 32/32] [bus 32/34] 
> Feb 29 00:37:09 localhost kernel:     host opts [1]: [ring] [serial pci & irq] [pci irq 11] [lat 32/32] [bus 35/37] 
> Feb 29 00:37:09 localhost kernel:     ISA irqs (default) = 3,4,7,9,10,12 PCI status changes 
> Feb 29 00:37:09 localhost pcmcia:  cardmgr.
> Feb 29 00:37:09 localhost rc: Starting pcmcia succeeded
> Feb 29 00:37:10 localhost cardmgr[377]: starting, version is 3.1.11
> Feb 29 00:37:10 localhost inet: inetd startup succeeded
> Feb 29 00:37:10 localhost kernel: cs: cb_alloc(bus 32): vendor 0x10b7, device 0x5257 
> Feb 29 00:37:10 localhost cardmgr[377]: watching 2 sockets
> Feb 29 00:37:10 localhost kernel: cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff 
> Feb 29 00:37:10 localhost kernel: cs: IO port probe 0x0800-0x08ff: excluding 0x800-0x84f 
> Feb 29 00:37:10 localhost kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7 
> Feb 29 00:37:10 localhost kernel: cs: IO port probe 0x0a00-0x0aff: clean. 
> Feb 29 00:37:10 localhost cardmgr[377]: initializing socket 0
> Feb 29 00:37:10 localhost cardmgr[377]: socket 0: 3Com 3CCFE575CT/3CXFE575CT Fast EtherLink XL
> Feb 29 00:37:10 localhost cardmgr[377]: executing: 'insmod /lib/modules/2.2.12-20/pcmcia/cb_enabler.o'
> Feb 29 00:37:10 localhost cardmgr[377]: executing: 'insmod /lib/modules/2.2.12-20/pcmcia/3c575_cb.o'
> Feb 29 00:37:10 localhost kernel: 3c59x.c:v0.99L 5/28/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html 
> Feb 29 00:37:10 localhost kernel: cs: cb_config(bus 32) 
> Feb 29 00:37:10 localhost kernel:   fn 0 bar 1: io 0x200-0x27f 
> Feb 29 00:37:10 localhost kernel:   fn 0 bar 2: mem 0x60021000-0x6002107f 
> Feb 29 00:37:10 localhost kernel:   fn 0 bar 3: mem 0x60020000-0x6002007f 
> Feb 29 00:37:10 localhost kernel:   fn 0 rom: mem 0x60000000-0x6001ffff 
> Feb 29 00:37:10 localhost kernel: vortex_attach(bus 32, function 0, device 5257) 
> Feb 29 00:37:10 localhost kernel: eth0: 3Com 3CCFE575CT Cyclone CardBus at 0x200,  00:50:da:b0:7a:85, IRQ 11 
> Feb 29 00:37:10 localhost kernel: eth0: CardBus functions mapped 60020000->c403e000 
> Feb 29 00:37:10 localhost kernel:   8K byte-wide RAM 5:3 Rx:Tx split, MII interface. 
> Feb 29 00:37:10 localhost kernel:   MII transceiver found at address 0, status 7809. 
> Feb 29 00:37:10 localhost kernel:   Enabling bus-master transmits and whole-frame receives. 
> Feb 29 00:37:10 localhost cardmgr[377]: executing: './network start eth0'
> Feb 29 00:37:10 localhost lpd: lpd startup succeeded
> Feb 29 00:37:11 localhost cardmgr[377]: initializing socket 1
> Feb 29 00:37:11 localhost kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. 
> Feb 29 00:37:11 localhost cardmgr[377]: socket 1: Serial or Modem
> Feb 29 00:37:11 localhost cardmgr[377]: executing: 'insmod /lib/modules/2.2.12-20/pcmcia/serial_cs.o'
> Feb 29 00:37:11 localhost kernel: tty01 at 0x02f8 (irq = 3) is a 16550A 
> Feb 29 00:37:11 localhost cardmgr[377]: executing: './serial start ttyS1'
> Feb 29 00:37:11 localhost keytable: Loading system font: 
> Feb 29 00:37:13 localhost linuxconf: Linuxconf final setup
> Feb 29 00:37:15 localhost rc: Starting linuxconf succeeded
> Feb 29 00:37:27 localhost PAM_pwdb[544]: (login) session opened for user root by LOGIN(uid=0)
> Feb 29 00:37:58 localhost kernel: tty01 unloaded 
> Feb 29 00:37:58 localhost cardmgr[377]: shutting down socket 1
> Feb 29 00:37:58 localhost cardmgr[377]: executing: './serial stop ttyS1'
> Feb 29 00:37:58 localhost cardmgr[377]: executing: 'rmmod serial_cs'
> Feb 29 00:38:04 localhost cardmgr[377]: initializing socket 1
> Feb 29 00:38:04 localhost cardmgr[377]: socket 1: Serial or Modem
> Feb 29 00:38:04 localhost cardmgr[377]: executing: 'insmod /lib/modules/2.2.12-20/pcmcia/serial_cs.o'
> Feb 29 00:38:04 localhost kernel: tty01 at 0x02f8 (irq = 3) is a 16550A 
> Feb 29 00:38:04 localhost cardmgr[377]: executing: './serial start ttyS1'
> Feb 29 00:38:06 localhost kernel: cs: cb_free(bus 32) 
> Feb 29 00:38:06 localhost cardmgr[377]: shutting down socket 0
> Feb 29 00:38:06 localhost cardmgr[377]: executing: './network stop eth0'
> Feb 29 00:38:07 localhost cardmgr[377]: executing: 'rmmod 3c575_cb'
> Feb 29 00:38:07 localhost cardmgr[377]: executing: 'rmmod cb_enabler'
> Feb 29 00:38:10 localhost kernel: cs: cb_alloc(bus 32): vendor 0x10b7, device 0x5257 
> Feb 29 00:38:10 localhost cardmgr[377]: initializing socket 0
> Feb 29 00:38:10 localhost cardmgr[377]: socket 0: 3Com 3CCFE575CT/3CXFE575CT Fast EtherLink XL
> Feb 29 00:38:10 localhost cardmgr[377]: executing: 'insmod /lib/modules/2.2.12-20/pcmcia/cb_enabler.o'
> Feb 29 00:38:10 localhost cardmgr[377]: executing: 'insmod /lib/modules/2.2.12-20/pcmcia/3c575_cb.o'
> Feb 29 00:38:10 localhost kernel: 3c59x.c:v0.99L 5/28/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html 
> Feb 29 00:38:10 localhost kernel: cs: cb_config(bus 32) 
> Feb 29 00:38:10 localhost kernel:   fn 0 bar 1: io 0x200-0x27f 
> Feb 29 00:38:10 localhost kernel:   fn 0 bar 2: mem 0xa0061000-0xa006107f 
> Feb 29 00:38:10 localhost kernel:   fn 0 bar 3: mem 0xa0060000-0xa006007f 
> Feb 29 00:38:10 localhost kernel:   fn 0 rom: mem 0xa0040000-0xa005ffff 
> Feb 29 00:38:10 localhost kernel: vortex_attach(bus 32, function 0, device 5257) 
> Feb 29 00:38:10 localhost kernel: eth0: 3Com 3CCFE575CT Cyclone CardBus at 0x200,  00:50:da:b0:7a:85, IRQ 11 
> Feb 29 00:38:10 localhost kernel: eth0: CardBus functions mapped a0060000->c403e000 
> Feb 29 00:38:10 localhost kernel:   8K byte-wide RAM 5:3 Rx:Tx split, MII interface. 
> Feb 29 00:38:10 localhost kernel:   MII transceiver found at address 0, status 7809. 
> Feb 29 00:38:10 localhost kernel:   Enabling bus-master transmits and whole-frame receives. 
> Feb 29 00:38:10 localhost cardmgr[377]: executing: './network start eth0'
> Feb 29 00:45:42 localhost kernel: cs: cb_free(bus 32) 
> Feb 29 00:45:42 localhost cardmgr[377]: shutting down socket 0
> Feb 29 00:45:42 localhost cardmgr[377]: executing: './network stop eth0'
> Feb 29 00:45:42 localhost cardmgr[377]: executing: 'rmmod 3c575_cb'
> Feb 29 00:45:42 localhost cardmgr[377]: executing: 'rmmod cb_enabler'
> Feb 29 00:46:16 localhost kernel: cs: cb_alloc(bus 32): vendor 0x10b7, device 0x5257 
> Feb 29 00:46:16 localhost cardmgr[377]: initializing socket 0
> Feb 29 00:46:16 localhost cardmgr[377]: socket 0: 3Com 3CCFE575CT/3CXFE575CT Fast EtherLink XL
> Feb 29 00:46:16 localhost cardmgr[377]: executing: 'insmod /lib/modules/2.2.12-20/pcmcia/cb_enabler.o'
> Feb 29 00:46:16 localhost cardmgr[377]: executing: 'insmod /lib/modules/2.2.12-20/pcmcia/3c575_cb.o'
> Feb 29 00:46:16 localhost kernel: 3c59x.c:v0.99L 5/28/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html 
> Feb 29 00:46:16 localhost kernel: cs: cb_config(bus 32) 
> Feb 29 00:46:16 localhost kernel:   fn 0 bar 1: io 0x200-0x27f 
> Feb 29 00:46:16 localhost kernel:   fn 0 bar 2: mem 0xa0061000-0xa006107f 
> Feb 29 00:46:16 localhost kernel:   fn 0 bar 3: mem 0xa0060000-0xa006007f 
> Feb 29 00:46:16 localhost kernel:   fn 0 rom: mem 0xa0040000-0xa005ffff 
> Feb 29 00:46:17 localhost kernel: vortex_attach(bus 32, function 0, device 5257) 
> Feb 29 00:46:17 localhost kernel: eth0: 3Com 3CCFE575CT Cyclone CardBus at 0x200,  00:50:da:b0:7a:85, IRQ 11 
> Feb 29 00:46:17 localhost kernel: eth0: CardBus functions mapped a0060000->c403e000 
> Feb 29 00:46:17 localhost kernel:   8K byte-wide RAM 5:3 Rx:Tx split, MII interface. 
> Feb 29 00:46:17 localhost kernel:   MII transceiver found at address 0, status 7809. 
> Feb 29 00:46:17 localhost kernel:   Enabling bus-master transmits and whole-frame receives. 
> Feb 29 00:46:16 localhost cardmgr[377]: executing: './network start eth0'

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. Ok: Problem solve when installing RH 6.2 by Dennis Schafroth, 2000, Apr 11

[ Add Message ]  to: "Dell (3Com) 3CCFE575CT-D transmitter light missing"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]