Next-in-Thread Next Message

Question 3c 575 

Forum: 3Com PCMCIA Ethernet Adapter Issues
Date: 1999, Nov 08
From: Christopher Naas Naas

I've tried it with another config. I get a different message.
This is my /var/log/messages log when I insert the card..
Help?

Nov  8 10:49:12 localhost kernel: vortex_detach(eth0)
Nov  8 10:49:12 localhost cardmgr[764]: shutting down socket 0
Nov  8 10:49:12 localhost cardmgr[764]: executing: './network stop eth0'
Nov  8 10:49:12 localhost cardmgr[764]: + usage: ifdown <device name>
Nov  8 10:49:12 localhost cardmgr[764]: stop cmd exited with status 1
Nov  8 10:49:12 localhost cardmgr[764]: executing: 'rmmod 3c575_cb'
Nov  8 10:49:12 localhost cardmgr[764]: executing: 'rmmod cb_enabler'
Nov  8 10:49:22 localhost cardmgr[764]: initializing socket 0
Nov  8 10:49:22 localhost cardmgr[764]: socket 0: 3Com 3CCFE575B/3CXFE575B Fast EtherLink XL
Nov  8 10:49:22 localhost cardmgr[764]: executing: 'insmod /lib/modules/2.2.12-20/pcmcia/cb_enabler.o'
Nov  8 10:49:22 localhost cardmgr[764]: executing: 'insmod /lib/modules/2.2.12-20/pcmcia/3c575_cb.o'
Nov  8 10:49:22 localhost kernel: 3c59x.c:v0.99L 5/28/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
Nov  8 10:49:22 localhost kernel: cs: cb_config(bus 32): vendor 0x10b7, device 0x5257
Nov  8 10:49:22 localhost kernel:   fn 0 bar 1: io 0x200-0x27f
Nov  8 10:49:22 localhost kernel:   fn 0 bar 2: mem 0x60021000-0x6002107f
Nov  8 10:49:22 localhost kernel:   fn 0 bar 3: mem 0x60020000-0x6002007f
Nov  8 10:49:22 localhost kernel:   fn 0 rom: mem 0x60000000-0x6001ffff
Nov  8 10:49:22 localhost kernel: vortex_attach(bus 32, function 0, device 5257)
Nov  8 10:49:22 localhost kernel: eth0: 3Com 3c575 series CardBus (unknown version) at 0x200,  00:50:da:55:27:ac, IRQ 3
Nov  8 10:49:22 localhost kernel:   8K byte-wide RAM 5:3 Rx:Tx split, MII interface.
Nov  8 10:49:22 localhost kernel:   MII transceiver found at address 0, status 7809.
Nov  8 10:49:22 localhost kernel:   Enabling bus-master transmits and whole-frame receives.
Nov  8 10:49:22 localhost cardmgr[764]: executing: './network start eth0'
Nov  8 10:49:22 localhost cardmgr[764]: + usage: ifup <device name>
Nov  8 10:49:22 localhost cardmgr[764]: start cmd exited with status 1

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None No problem: now it might be good to configure eth0 by David Hinds, 1999, Nov 08
(_ None 3ccfe575ct continued by Christopher Naas, 1999, Nov 08
(_ None Sorry, I didn't notice the "CT" bit... by David Hinds, 1999, Nov 08

Add Message to: "3c 575"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10