[ Next-in-Thread ]  [ Next Message ] 

3ccfe575ct continued 

Forum: 3Com PCMCIA Ethernet Adapter Issues
Re: Question: 3c 575 (Christopher Naas)
Re: No problem: now it might be good to configure eth0 (David Hinds)
Date: 1999, Nov 08
From: Christopher Naas Naas 

Okay, I set it up with linuxconfig, and now eth0 starts up
when I insert the card.
My problem now is that no lights light (10/100) and I can
only ping myself..
I am using the 3CCFE575CT card that came with my toshiba.
I edited the config for 3CCFE575B
manfid 0x0101, 0x5157
to
manfid 0x0101, 0x5257

so that the CT card would be detected.. 
I am using the pcmcia software that came with the original
RedHat 6.1 installation.

Have I done wrong in editing it?
Do I need to install any patches?

	chris

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. Sorry, I didn't notice the "CT" bit... by David Hinds, 1999, Nov 08

[ Add Message ]  to: "3ccfe575ct continued"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]