Next-in-Thread Next Message

None Compiles (w/o ray_cs.c) & works 

Forum: 3Com PCMCIA Ethernet Adapter Issues
Re: Sad ToPIC97 RequestIRQ failure (2.3.99-pre3, 3.1.13) (Rob Braun)
Re: None The build problem is fixed in the current beta (David Hinds)
Date: 2000, Apr 04
From: Rob Braun bbraun

The PCMCIA support built separatly works fine on 2.3.99pre3 and the beta version of 3.1.14 from Mar31, although ray_cs.c doesn't build properly. I can take a look at it and try to fix it, but each time I do, someone else has already fixed it, so I thought I'd ask first. =)

For debugging the kernel version of the PCMCIA support, the modular version enters into polling mode, although the kernel version does not.

Here is the output from the working version (3.1.14beta with the 2.3.99pre3, no kernel support).

Rob

  kernel build: 2.3.99-pre3 #1 Tue Apr 4 00:29:23 MDT 2000
  options:  [pci] [cardbus] [apm]
Intel PCIC probe: <4>PCI: No IRQ known for interrupt pin A of device 00:13.0.
PCI: No IRQ known for interrupt pin B of device 00:13.1.

  Toshiba ToPIC97 rev 20 PCI-to-CardBus at slot 00:13, mem 0xfff00000
    host opts [0]: [slot 0xf0] [ccr 0x10] [cdr 0x86] [rcr 0x02] [no pci irq] [lat 168/176] [bus 20/20]
    host opts [1]: [slot 0xf0] [ccr 0x20] [cdr 0x86] [rcr 0x02] [no pci irq] [lat 168/176] [bus 21/21]
    ISA irqs (default) = 3,4,7,9,10,15 polling interval = 1000 ms

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None Re: Compiles (w/o ray_cs.c) & works by David Hinds, 2000, Apr 04
(_ None 04Apr00 works + dump_pirq output by Rob Braun, 2000, Apr 05
(_ None Re: 04Apr00 works + dump_pirq output by David Hinds, 2000, Apr 05

Add Message to: "Compiles (w/o ray_cs.c) & works"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10