Next-in-Thread Next Message

None 04Apr00 works + dump_pirq output 

Forum: 3Com PCMCIA Ethernet Adapter Issues
Re: Sad ToPIC97 RequestIRQ failure (2.3.99-pre3, 3.1.13) (Rob Braun)
Re: None The build problem is fixed in the current beta (David Hinds)
Re: None Compiles (w/o ray_cs.c) & works (Rob Braun)
Re: None Re: Compiles (w/o ray_cs.c) & works (David Hinds)
Date: 2000, Apr 05
From: Rob Braun bbraun

The 04Apr00 release compiles fine, and I've gotten the ray_cs driver working fine with my webgear card. Thanks.

For tracking down some of the remaining issues, here's the dump_pirq output. The libretto 100 has no IRQ's for any PCI device on it. Kinda broken, especially for a laptop, but oh well.

Thanks, Rob

Interrupt routing table found at address 0xf8e80:
  Version 1.0, size 0x0070
  Interrupt router is device 00:01.0
  PCI exclusive interrupt mask: 0x0000
  Compatible router: vendor 0x1179 device 0x0602

Device 00:11.0 (slot 0):
  INTA: link 0x01, irq mask 0xdef8

Device 00:04.0 (slot 0):

Device 00:13.0 (slot 0):
  INTA: link 0x01, irq mask 0xdef8
  INTB: link 0x01, irq mask 0xdef8

Device 00:06.0 (slot 1):
  INTA: link 0x01, irq mask 0xdef8
  INTB: link 0x01, irq mask 0xdef8

Device 00:0b.0 (slot 1):
  INTA: link 0x01, irq mask 0xdef8

Could not read router info from /proc/bus/pci/00/01.0.

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None Re: 04Apr00 works + dump_pirq output by David Hinds, 2000, Apr 05

Add Message to: "04Apr00 works + dump_pirq output"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10