Next-in-Thread Next Message

Question 3CXFE575CT not being detected properly 

Forum: 3Com PCMCIA Ethernet Adapter Issues
Date: 2000, May 03
From: Michael Lee avaja

I'm trying to get my 3CXFE575CT cardbus card to work under
redhat 6.2, which was working previously with a 3cfe575tx
cardbus card just fine.  When I insert my new card, I get the
following message in /var/log/messages:

...cardmgr[896]: initializing socket 0
...cardmgr[896]: unsupported card in socket 0
...kernel: cs: cb_alloc(bus 32): vendor 0x10b7, device 0x5257
...cardmgr[896]: no product info available

cardctl ident returns the following:

Socket 0:
  product info: "3Com Corpobation", "3CCFE%75CD", "LAN Cabdbuc Cabd", "0 4"
 function: 6 (network)

(note, the mispellings were duplicated)

I'm not able to get any sort of manfid info at all, and when I
do insert the above stuff returned by cardctl ident as version
information for the card in the config file, it still doesn't
get recognized upon insertion.  Every other card I have,
cardbus or no, that I insert into the slot gets recognized
correctly and the logs show a manfid and correct product info
for them.

I've tired changing the unreset_delay to 300 in the CORE_OPTS,
out of desperation, but that didn't help.

Can anybody help me determine what I need to do to get at the
information on the card so I can even begin trying to get it
recognized properly?

Next-in-Thread Next Message

Select this message: 3CXFE575CT not being detected properly

Messages Inline: 1 All Outline: 1 2 All

1. None Looks to me like a simple hardware fault by David Hinds, 2000, May 03
(_ Question How come it works under windows 98? by Michael Lee, 2000, May 12
(_ None Hmmm, that's a good question by David Hinds, 2000, May 12

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at 1.10
[ Edit This Forum ]