Next-in-Thread Next Message

Idea 2 little ideas for pcmcia-cs 

Forum: PCMCIA driver development
Date: 2000, Jan 18
From: Stefan Kapfhammer StefanKapfhammer

Hi David,

on your last reply I stopped using DVLP-kernels. But there are also 2 little problems (ideas) in version up to 3.1.9.

1. If /sbin/setserial has not the modes "a-x" the port gives
   a input/output error. This could be fixed if the       config-script checks for the modes and if wrong set to       them.

2. I set the irq exclusion to 3,4,5,7,9 in       /etc/pcmcia/config.opts, but cardservices tells in startup
   ISA irqs 3,10 status changes. This can only be fixed if
   I set PCIC_OPTS="irq_list=10" in /sbin/init.d/pcmcia every
   time I compile and install the package. Also input/output
   error in this point.

My configuration: Xircom RBEM-56G-100BTX Toshiba Tecra 8000 / ToPIC97 enabled using pci irq 11 - SuSE Linux 6.3 with Kernel 2.2.14 - serial.o compiled as module with share_irq enabled

make config using cardbus and pnp resource checking enabled.

Hope this helps a bit getting the the package more perfect. ;)

Regards,

Stefan

Next-in-Thread Next Message

Add Message to: "2 little ideas for pcmcia-cs"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10