Next-in-Thread Next Message

Sad system hang upon pcmcia subsystem start 

Forum: PCMCIA driver development
Date: 2000, May 31
From: Tonko de Rooy tderooy


I have a IBM ThinkPad 770X with a TI1251A.
I have been using this machine with varies Redhat Linux versions (6.0-6.2) and have always compiled my own kernels and hence PCMCIA packages.

Now since I upgraded to RedHat 6.2 and then compiled my own kernel (2.2.14, 2.2.15 or 2.2.16pre6) and compile the PCMCIA package (3.1.14 or 3.1.15) and load the pcmcia subsystem the system effectively hangs. I can still when I'm in textmode switch consoles and try to login but it looks like that any atempt to access the harddisk hangs.

I compile the PCMCIA package with isa pnp and cardbus support, as I have a 10/100Mb cardbus card. This always used to work in the past without problems.

With RH 6.2 the only way for me to have PCMCIA working at current is to use the standard pre-compiled kernel and pcmcia package that comes with redhat. And that is giving me a lot of problems as the default APM options are wrong for this machine.

The PCMCIA version (3.1.8) that RedHat supplies with 6.2 prints the following:

Linux PCMCIA Card Services 3.1.8
  kernel build: 2.2.14-12 #1 Tue Apr 25 13:04:07 EDT 2000
  options: [pci] [cardbus] [apm]
Intel PCIC probe:
  TI 1251A PCI-to-CardBus at bus 0 slot 2, mem 0x50103000, 2 sockets
  host opts [0]: [ring] [pwr save] [isa irq] [no pci irq] [lat 168/176] [bus 2/4]
  host opts [1]: [ring] [pwr save] [isa irq] [no pci irq] [lat 168/176] [bus 5/7]
  ISA irqs (scanned) = 3,4,7,9,10 polling interval = 1000 ms
cs: IO port probe 0x1000-0x17ff: excluding 0x15e8-0x15ef
cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.

Next-in-Thread Next Message

Select this message: system hang upon pcmcia subsystem start

Messages Inline: 1 All Outline: 1 2 All

1. None Re: Sad: system hang upon pcmcia subsystem start by David Hinds, 2000, May 31
(_ Question it now works by Tonko de Rooy, 2000, Jun 04

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at 1.10
[ Edit This Forum ]