|
Hi, For some strange reason it now works. I recompiled the 2.2.16pre6 kernel and pcmcia 3.1.15 and it all loads and works again perfectly.
here is what gets printed now to syslog:
Linux PCMCIA Card Services 3.1.15
kernel build: 2.2.16pre6 #1 Wed May 31 11:33:44 BST 2000
options: [pci] [cardbus] [apm] [pnp]
PCI routing table version 1.0 at 0xf9f80
PnP: PNP BIOS installation structure at 0xc00fe700
PnP: PNP BIOS version 1.0, entry at f0000:e724, dseg at f0000
Intel PCIC probe:
TI 1251A rev 00 PCI-to-CardBus at slot 00:02, mem 0x50103000
host opts [0]: [ring] [isa irq] [pci irq 11] [lat 168/176] [bus 2/4]
host opts [1]: [ring] [isa irq] [pci irq 11] [lat 168/176] [bus 5/7]
ISA irqs (scanned) = 3,4,9,10 PCI status changes
cs: IO port probe 0x1000-0x17ff: clean.
cs: IO port probe 0x0100-0x04ff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
cs: memory probe 0x60000000-0x60ffffff: clean.
The only thing left is that I get a error when running depmod on epic_cb. Here is what depmod -ae tells me: depmod: *** Unresolved symbols in /lib/modules/2.2.16pre6/pcmcia/epic_cb.o depmod: epic100_probeBut this is a longer standing problem. I always have this problem when I compile my own kernel and modules. And as I have no idea what epic_cb is, I probably don't need it and don't need to worry to much about the error. |