>> ISA irqs (default) = none! polling interval = 1000 ms > > It looks like you're specifying an irq_list that doesn't >include any > interrupts that are actually available? > > But that isn't your immediate problem. I removed the irq_list from /etc/sysconfig/pcmcia and now dmesg reports:
Linux PCMCIA Card Services 3.1.10
kernel build: 2.0.36 #3 Sat Oct 2 12:56:34 EDT 1999
options: [pci] [cardbus]
Intel PCIC probe:
VIA VT83C469 ISA-to-PCMCIA at port 0x3e0 ofs 0x00
host opts [0]: [ring]
host opts [1]: [ring]
ISA irqs (default) = 4,7,10,11,14 polling interval = 1000 ms
cs: IO port probe 0x03e0-0x03e1: clean.
cs: memory probe 0x0d0000-0x0dffff: clean.
> > > When I insert the card I get this from dmesg: > > ide_cs: GetNextTuple: No more items > > The IDE driver isn't finding the information it needs. Can >you post > the output of "dump_cis"? This is a different CF card than in my first post but same result. dump_cis reports:
Socket 0:
dev_info
fn_specific 400ns, 2kb
common_jedec 0xdf 0x01
manfid 0x0007, 0x0000
vers_1 4.1, "HITACHI", "FLASH", "4.0"
funcid fixed_disk [post]
disk_interface [ide]
disk_features [silicon] [unique] [single]
[sleep] [standby] [idle] [low power]
config base 0x0200 mask 0x000f last_index 0x03
cftable_entry 0x00 [default]
[rdybsy] [pwrdown]
Vcc Vnom 5V
memory 0x0000-0x07ff @ 0x0000
cftable_entry 0x00
Vcc Vnom 3300mV Ipeak 45mA
cftable_entry 0x01 [default]
[rdybsy] [pwrdown]
Vcc Vnom 5V
io 0x0000-0x000f [lines=4] [8bit] [16bit]
irq mask 0xffff [level] [pulse] [shared]
cftable_entry 0x01
Vcc Vnom 3300mV Ipeak 45mA
cftable_entry 0x02 [default]
[rdybsy] [pwrdown]
Vcc Vnom 5V
io 0x01f0-0x01f7, 0x03f6-0x03f7 [lines=10] [8bit] [16bit] [range]
irq 14 [level] [pulse] [shared]
cftable_entry 0x02
Vcc Vnom 3300mV Ipeak 45mA
cftable_entry 0x03 [default]
[rdybsy] [pwrdown]
Vcc Vnom 5V
io 0x0170-0x0177, 0x0376-0x0377 [lines=10] [8bit] [16bit] [range]
irq 14 [level] [pulse] [shared]
cftable_entry 0x03
Vcc Vnom 3300mV Ipeak 45mA
Socket 1: no CIS present
> > -- Dave Thanks, Steve
|
Messages