I have:
pcmcia-3.1.13 + a patch
(so that pci status changes work)
linux-2.2.14
dell inspiron 5k
simple technology smartmedia adaptor
When I insert this card (with no other cards inserted) it
makes the two good beeps, but it doesn't actually work.
Here is what the syslog shows:
Apr 4 18:21:30 alice kernel: Linux PCMCIA Card Services 3.1.13
Apr 4 18:21:30 alice kernel: kernel build: 2.2.14-5.0 #1 Tue Mar 7 21:07:39 EST 2000
Apr 4 18:21:30 alice kernel: options: [pci] [cardbus] [apm] [pnp]
Apr 4 18:21:30 alice kernel: PCI routing table version 1.0 at 0xfdf50
Apr 4 18:21:30 alice kernel: PnP: PNP BIOS installation structure at 0xc00f7220
Apr 4 18:21:30 alice kernel: PnP: PNP BIOS version 1.0, entry at f0000:a77c, dseg at 400
Apr 4 18:21:30 alice kernel: Intel PCIC probe:
Apr 4 18:21:30 alice kernel: TI 1225 PCI-to-CardBus at slot 00:04, mem 0x68000000
Apr 4 18:21:30 alice kernel: host opts [0]: [ring] [serial pci & irq] [pci irq 11] [lat 168/32] [bus 32/34]
Apr 4 18:21:30 alice kernel: host opts [1]: [ring] [serial pci & irq] [pci irq 11] [lat 168/32] [bus 35/37]
Apr 4 18:21:30 alice kernel: ISA irqs (scanned) = 9,10 PCI status changes
Apr 4 18:21:30 alice cardmgr[1081]: starting, version is 3.1.13
Apr 4 18:21:30 alice cardmgr[1081]: watching 2 sockets
Apr 4 18:21:30 alice kernel: cs: IO port probe 0x1000-0x17ff: clean.
Apr 4 18:21:30 alice kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x370-0x377
Apr 4 18:21:30 alice cardmgr[1081]: could not adjust resource: IO ports 0x300-0x3ff: Device or resource busy
Apr 4 18:21:30 alice cardmgr[1081]: could not adjust resource: IO ports 0x200-0x27f: Device or resource busy
Apr 4 18:21:57 alice cardmgr[1081]: initializing socket 1
Apr 4 18:21:57 alice kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean.
Apr 4 18:21:57 alice cardmgr[1081]: error parsing CIS on socket 1: Invalid argument
Apr 4 18:21:57 alice cardmgr[1081]: socket 1: ATA/IDE Fixed Disk
Apr 4 18:21:57 alice cardmgr[1081]: executing: 'insmod /lib/modules/2.2.14-5.0/pcmcia/ide_cs.o'
Apr 4 18:22:02 alice kernel: hdc: , ATA DISK drive
Apr 4 18:22:02 alice kernel: ide1 at 0x100-0x107,0x10e on irq 9
Apr 4 18:22:02 alice kernel: hdc: , 31MB w/1kB Cache, CHS=500/8/16
Apr 4 18:22:02 alice kernel: hdc: hdc1
Apr 4 18:22:02 alice kernel: ide_cs: hdc: Vcc = 5.0, Vpp = 12.0
Apr 4 18:22:02 alice cardmgr[1081]: executing: './ide start hdc'
Apr 4 18:22:02 alice kernel: hdc: hdc1
Apr 4 18:22:02 alice kernel: hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
Apr 4 18:22:02 alice kernel: hdc: drive_cmd: error=0x04 { DriveStatusError }
Apr 4 18:22:34 alice cardmgr[1081]: shutting down socket 1
Apr 4 18:22:34 alice cardmgr[1081]: executing: './ide stop hdc'
Apr 4 18:22:34 alice modprobe: modprobe: Can't locate module block-major-22
Apr 4 18:22:34 alice cardmgr[1081]: + open() failed: No such device
Apr 4 18:22:34 alice cardmgr[1081]: executing: 'rmmod ide_cs'
|
Messages