|
Last night I recorded the info from using the same card on my desktop computer. On insertion, the kernel logged:
Jul 14 00:02:20 hubbub cardmgr[419]: initializing socket 0 Jul 14 00:02:20 hubbub cardmgr[419]: socket 0: ATA/IDE Fixed Disk Jul 14 00:02:20 hubbub cardmgr[419]: executing: 'insmod /lib/modules/2.2.12-20/pcmcia/ide_cs.o' Jul 14 00:02:22 hubbub kernel: hdc: SunDisk SDP-10.4, ATA DISK drive Jul 14 00:02:22 hubbub kernel: hdd: SunDisk SDP-10.4, ATA DISK drive Jul 14 00:02:22 hubbub kernel: ide2: ports already in use, skipping probe Jul 14 00:02:22 hubbub kernel: ide1 at 0x100-0x107,0x10e on irq 9 Jul 14 00:02:22 hubbub kernel: hdc: SunDisk SDP-10.4, 10MB w/1kB Cache, CHS=320/2/32 Jul 14 00:02:22 hubbub kernel: hdd: SunDisk SDP-10.4, 10MB w/1kB Cache, CHS=320/2/32 Jul 14 00:02:22 hubbub kernel: hdc: hdc1 Jul 14 00:02:22 hubbub kernel: hdd: hdd1 Jul 14 00:02:22 hubbub kernel: ide_cs: hdc: Vcc = 5.0, Vpp = 12.0 Jul 14 00:02:22 hubbub cardmgr[419]: executing: './ide start hdc' Jul 14 00:02:22 hubbub cardmgr[419]: + ./ide: /sbin/ide_info: No such file or di rectory cardctl status reported:
Socket 0: 5V 16-bit card present Function 0: ready, battery dead, battery low cardctl config reported:
Socket 0:
Vcc = 5.0, Vpp1 = 12.0, Vpp2 = 12.0
Interface type is memory and I/O
IRQ 9 is exclusive, level mode, enabled
Function 0:
Config register base = 0x0200
Option = 0x41, status = 0000, pin = 0000, copy = 0000
I/O window 1: 0x0100 to 0x010f, auto sized
cardctl ident reported:
Socket 0: product info: "SunDisk", "SDP", "1.5" manfid: 0x0045, 0x0101 function: 4 (fixed disk) The card works fine there; any idea why the ThinkPad 240 would think that it's a 3.3V card? I don't have Windows on the ThinkPad, so I can't determine whether that works. Maybe I can set up a DOS boot disk with the appropriate enabler and try it out. |
Messages