Next-in-Thread Next Message

More Almost worked 

Forum: PCMCIA ATA/IDE Device Issues
Re: Question Compact Flash Hangs old Laptop (Rui-Tao Dong)
Re: None It is a hardware incompatibility (David Hinds)
Re: More Is there a reference? (Rui-Tao Dong)
Re: None Again, I don't recommend this at all (David Hinds)
Date: 2000, Jul 19
From: Rui-Tao Dong rdong

Using a multimeter, I found the pin on the adapter which 
connects to pin 43.  I pushed the pin back and forth with a
small screwdriver until it breaks.   I popped it into the 
laptop, and it didn't freeze!  Instead the cardmgr says,
Jul 14 18:48:19 Alpha cardmgr[394]: initializing socket 0
Jul 14 18:48:19 Alpha cardmgr[394]: socket 0: ATA/IDE Fixed Disk
Jul 14 18:48:19 Alpha cardmgr[394]: executing: 'insmod /lib/modules/2.2.14/pcmcia/ide_cs.o'
Jul 14 18:49:07 Alpha kernel: hda: probing with STATUS(0xff) instead of ALTSTATUS(0x50) 
Jul 14 18:49:07 Alpha kernel: hda: probing with STATUS(0xff) instead of ALTSTATUS(0x50) 
Jul 14 18:49:07 Alpha kernel: hda: no response (status = 0xff), resetting drive 
Jul 14 18:49:07 Alpha kernel: hda: probing with STATUS(0xff) instead of ALTSTATUS(0x50) 
Jul 14 18:49:07 Alpha kernel: hda: no response (status = 0xff) 
Jul 14 18:49:31 Alpha kernel: ide_cs: ide_register() at 0x140 & 0x14e, irq 7 failed 
Jul 14 18:49:32 Alpha cardmgr[394]: get dev info on socket 0 failed: Resource temporarily unavailable
Jul 14 18:49:32 Alpha cardmgr[394]: shutting down socket 0
Jul 14 18:49:32 Alpha cardmgr[394]: executing: 'rmmod ide_cs'


Looks like if I can get it to pass through the probing phase,
then I'll be in a good shape. 

Next-in-Thread Next Message

Select this message: Almost worked

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]