|
Hi guys,
I have a couple of issues with PCMCIA related stuff. One of them is urgent and about the PCMCIA Adapter. The Adapter is from Quatech. It is a PCD2-F/PCI. The configuration of the Card drive seems to be PCI bridge probe: Ricoh RL5C476 found, 2 sockets.fine. 'probe' gives: I am running RedHat 6.2 on a Dell Dimension XPS T600r. I upgraded from RedHat 6.1 a couple of weeks ago. The problems start when I insert cards. It is not like he doesn't recognize them. Linux actually configures them properly but it takes a realy long time and I get some funky error messages in the /var/log/messages files: When I insert a SunDisk 10 MB compact flash card, i get the following messages...
Aug 9 14:25:38 idefix cardmgr[450]: initializing socket 1 Aug 9 14:25:38 idefix cardmgr[450]: socket 1: ATA/IDE Fixed Disk Aug 9 14:25:38 idefix kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. Aug 9 14:25:39 idefix cardmgr[450]: executing: 'insmod /lib/modules/2.2.14-5.0/pcmcia/ide_cs.o' Aug 9 14:25:41 idefix kernel: hde: SunDisk SDCFB-10, ATA DISK drive Aug 9 14:25:41 idefix kernel: ide2 at 0x100-0x107,0x10e on irq 3 Aug 9 14:25:41 idefix kernel: hde: SunDisk SDCFB-10, 10MB w/1kB Cache, CHS=320/2/32 Aug 9 14:25:51 idefix kernel: hde:hde: lost interrupt Aug 9 14:26:01 idefix kernel: hde: lost interrupt Aug 9 14:26:41 idefix last message repeated 4 times Aug 9 14:26:41 idefix kernel: unknown partition table Aug 9 14:26:41 idefix kernel: ide_cs: hde: Vcc = 3.3, Vpp = 0.0 Aug 9 14:26:41 idefix cardmgr[450]: executing: './ide start hde' Aug 9 14:26:41 idefix cardmgr[450]: + ./ide: /sbin/ide_info: No such file or directory When I try my LinkSys EtherFast 10/100 PC Card, I get the following log... ug 9 15:21:49 idefix cardmgr[449]: initializing socket 0 Aug 9 15:21:49 idefix cardmgr[449]: socket 0: NE2000 Compatible Ethernet Aug 9 15:21:49 idefix cardmgr[449]: executing: 'insmod /lib/modules/2.2.14-5.0/net/8390.o' Aug 9 15:21:49 idefix cardmgr[449]: executing: 'insmod /lib/modules/2.2.14-5.0/pcmcia/pcnet_cs.o' Aug 9 15:21:49 idefix kernel: eth0: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:E0:98:82:4A:71 Aug 9 15:21:49 idefix cardmgr[449]: executing: './network start eth0' Aug 9 15:21:49 idefix pumpd[1327]: starting at (uptime 0 days, 0:14:17) Wed Aug 9 15:21:49 2000 Aug 9 15:21:51 idefix kernel: eth0: interrupt(s) dropped! Aug 9 15:21:53 idefix kernel: eth0: interrupt(s) dropped! Aug 9 15:21:53 idefix pumpd[1327]: configured interface eth0 Aug 9 15:21:53 idefix cardmgr[449]: + Determining IP information for eth0... done. Aug 9 15:22:31 idefix last message repeated 6 times I don't really know what is going on. It seems to "send a packet and them time out". I would appreciate help on that issue. Perhaps some explanation on the PCIC_OPTS with regards to PCI. If you need more info, feel free to ask. Cheers, Nick
|
Messages