[ Next-in-Thread ]  [ Next Message ] 

Interrupt configuration issue: driver upgrade needed 

Forum: PCMCIA ATA/IDE Device Issues
Re: Question: Problems with PCI to PCMCIA Adpater (Nicolas Malsch)
Date: 2000, Aug 10
From: David Hinds <dhinds@pcmcia.sourceforge.org> 

This configuration is not supported by the PCMCIA drivers in Red Hat
6.2.  You will need to upgrade to a current driver package (3.1.19 at
the moment), then set:

  PCIC_OPTS="irq_mode=0"

in /etc/sysconfig/pcmcia, to tell the PCMCIA drivers to only use PCI
interrupts for this CardBus bridge.

-- Dave

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. More: upgrade didn't solve all issues... :- by Nicolas Malsch, 2000, Aug 22
(_ Hmmm, I think this is an IDE driver bug by David Hinds, 2000, Aug 23

[ Add Message ]  to: "Interrupt configuration issue: driver upgrade needed"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]