Next-in-Thread Next Message

Question Shuttle Tech PCMCIA IDE/ATA HDD 

Forum: PCMCIA ATA/IDE Device Issues
Date: 1999, Dec 21
From: Ronald Yeo ronyeo

Hi,
 I have a PCMCIA HDD, that I have not been able to get running
in Linux.  (Shuttle Technology) In Win, it is setup as a primary-slave
and it is seen when I insert the card.  
 FYI, the devs in my /dev/ dir only goes to hdh9.

Dec  6 01:40:15 pc15 cardmgr[342]: socket 0: ATA/IDE Fixed Disk
Dec  6 01:40:15 pc15 cardmgr[342]: executing: 'insmod /lib/modules/2.2.13-7mdk/pcmcia/ide_cs.o'
Dec  6 01:40:20 pc15 kernel: hdl: ST92130AG, ATA DISK drive
Dec  6 01:40:20 pc15 kernel: ide5 at 0x160-0x167,0x366 on irq 3
Dec  6 01:40:20 pc15 kernel: hdl: ST92130AG, 2062MB w/0kB Cache, CHS=4191/16/63
Dec  6 01:40:20 pc15 kernel:  hdl: [PTBL] [523/128/63] hdl1 < hdl5 hdl6 hdl7 hdl8 >
Dec  6 01:40:20 pc15 kernel: ide_cs: hdk: Vcc = 5.0, Vpp = 0.0
Dec  6 01:40:20 pc15 cardmgr[342]: executing: './ide start hdk'
Dec  6 01:40:20 pc15 cardmgr[342]: + ./MAKEDEV: don't know how to make device "hdk"
Dec  6 01:40:20 pc15 cardmgr[342]: + open() failed: No such file or directory
Dec  6 01:40:20 pc15 cardmgr[342]: + ./ide: ./ide.opts: No such file or directory
Dec  6 01:40:20 pc15 cardmgr[342]: start cmd exited with status 1  

When I have another card (modem/nic combo) in the socket, I get an additional 2 line :

Dec  6 00:50:07 pc15 kernel: ide2: ports already in use, skipping probe
Dec  6 00:50:08 pc15 kernel: ide2: ports already in use, skipping probe

Appreciate any pointers.

I'm at my wit's end as I have been struggling with this for a long time. It's also one of the few last things that's tying me to MS.

Kernel is 2.2.13-7mdk and kernel-pcmcia-cs-2.2.13-7mdk

Ronald

Next-in-Thread Next Message

Select this message: Shuttle Tech PCMCIA IDE/ATA HDD

Messages Inline: 1 All Outline: 1 2 All

1. None MAKEDEV is not smart enough... by David Hinds, 1999, Dec 28

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]