Hi, I have a PCMCIA HDD, that I have not been able to get running in Linux. (Shuttle Technology) In Win, it is setup as a primary-slave and it is seen when I insert the card. FYI, the devs in my /dev/ dir only goes to hdh9.
Dec 6 01:40:15 pc15 cardmgr[342]: socket 0: ATA/IDE Fixed Disk Dec 6 01:40:15 pc15 cardmgr[342]: executing: 'insmod /lib/modules/2.2.13-7mdk/pcmcia/ide_cs.o' Dec 6 01:40:20 pc15 kernel: hdl: ST92130AG, ATA DISK drive Dec 6 01:40:20 pc15 kernel: ide5 at 0x160-0x167,0x366 on irq 3 Dec 6 01:40:20 pc15 kernel: hdl: ST92130AG, 2062MB w/0kB Cache, CHS=4191/16/63 Dec 6 01:40:20 pc15 kernel: hdl: [PTBL] [523/128/63] hdl1 < hdl5 hdl6 hdl7 hdl8 > Dec 6 01:40:20 pc15 kernel: ide_cs: hdk: Vcc = 5.0, Vpp = 0.0 Dec 6 01:40:20 pc15 cardmgr[342]: executing: './ide start hdk' Dec 6 01:40:20 pc15 cardmgr[342]: + ./MAKEDEV: don't know how to make device "hdk" Dec 6 01:40:20 pc15 cardmgr[342]: + open() failed: No such file or directory Dec 6 01:40:20 pc15 cardmgr[342]: + ./ide: ./ide.opts: No such file or directory Dec 6 01:40:20 pc15 cardmgr[342]: start cmd exited with status 1 When I have another card (modem/nic combo) in the socket, I get an additional 2 line :
Dec 6 00:50:07 pc15 kernel: ide2: ports already in use, skipping probe Dec 6 00:50:08 pc15 kernel: ide2: ports already in use, skipping probe Appreciate any pointers. I'm at my wit's end as I have been struggling with this for a long time. It's also one of the few last things that's tying me to MS. Kernel is 2.2.13-7mdk and kernel-pcmcia-cs-2.2.13-7mdk Ronald
|
Messages