• Information about specific Linux distributions
• Resolving installation and configuration problems

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ 3 ] 

2. Question: Unresolved symbols by Joseph Turian, 1999, Nov 01

1. Bad CFLAGS during compilation by David Hinds, 1999, Nov 01

3. Problems with Vadem VG-469 isa bridge by Steve Kann, 1999, Nov 02

1. No good ideas, unfortunately by David Hinds, 1999, Nov 30

2. Ok: Older version(s) seems to work. by Dan, 1999, Dec 15

4. Question: Untitled by Joseph Turian, 1999, Nov 02

1. PCIC probe: not found. by David Hinds, 1999, Nov 02

6. Question: memory probe failure? by Thomas Schaefer, 1999, Nov 09

1. That's some old stuff... by David Hinds, 1999, Nov 11

2. Question: sorry, more problems by Thomas Schaefer, 1999, Nov 16

7. Note: in case 3.1.2 or higher is hanging your system.... by Adam Di Carlo, 1999, Nov 10

8. Question: Which is *preferred*, PnP or not? by Steve Snyder, 1999, Nov 11

1. Kernel PnP settings shouldn't matter by David Hinds, 1999, Nov 11

9. Question: external scsi pcmcia card reader/writer by Eric Bourque, 1999, Nov 15

1. Actually, these just work like SCSI drives by David Hinds, 1999, Nov 15

12. Question: No Power on Sycard PCChost 1200? by Patrick Osterloh, 1999, Nov 25

1. Warning: Patch for TI1220 on Sycard´s PCChost1200 PCI-Cardbus Adapter by Patrick Osterloh, 1999, Nov 28

13. Question: Kernel source tree from RPMs by Peter Townsend, 1999, Nov 26

1. RPM's versus SRPM's by David Hinds, 1999, Nov 29

(_ Question: additional info by Peter Townsend, 1999, Nov 29

1. Question: success but PCMCIA hangs by Peter Townsend, 1999, Nov 29

1. That's strange... by David Hinds, 1999, Nov 29

2. make config by David Hinds, 1999, Nov 29

14. Warning: cardmgr.c Patch - Linux 2.2.14pre9 patch to /usr/src/linux/include/scsi/scsi.h adds spinlocks by Todd A. Wood, 1999, Nov 27 (Moved)

15. Question: Machine Reboots on high volume network traffic by Jason M. Sullivan, 1999, Nov 29

1. Disabling IO probing is a bad idea by David Hinds, 1999, Nov 29

(_ More: Working now, but one last question by Jason M. Sullivan, 1999, Nov 30

(_ Clean resource allocation is hard by David Hinds, 1999, Nov 30

(_ More: Time for me to talk to TI/Acer by Jason M. Sullivan, 1999, Nov 30

17. Question: PCMCIA Configuration on ThinkPad 760XD with docking station by Adam Czezowski, 1999, Dec 07

1. It is not a simple problem by David Hinds, 1999, Dec 07

18. Question: Error compile 3.1.6 ! by J.P, 1999, Dec 12

1. Sorry, my fault... by David Hinds, 1999, Dec 13

20. Question: Any advantage (possible) to disable 2nd PCMCIA host? by Steve Snyder, 1999, Dec 17

1. Not really, as far as I know by David Hinds, 1999, Dec 17

21. Sad: Problems with 3.1.7 kernel 2.2.13 Redhat 6.0 by dave_sneddon@excite.com, 1999, Dec 19

1. Looks like a goofed up /etc/pcmcia/config.opts file by David Hinds, 1999, Dec 20

(_ Sad: What should it be? by dave_sneddon@excite.com, 1999, Dec 20

22. Question: PCMCIA modules fail to load during bootup by anup ochani, 1999, Dec 21

1. Maybe an interrupt probe problem by David Hinds, 1999, Dec 21

23. Question: SIGHUP to cardmgr fixes break, why? by Dan, 1999, Dec 23

1. Ok: Fixed that problem... (jeez) by Dan, 2000, Jan 16

24. Question: Oops on mistaken identity by John Langford, 1999, Dec 24

1. It's a bug in /etc/pcmcia/config by David Hinds, 1999, Dec 25

25. Question: Failure to identify cards on a Toshiba 425CDS by Alexander Garden, 1999, Dec 27

1. With old code, debugging options are very limited by David Hinds, 1999, Dec 28

26. Question: Problem compiling 3.1.8 by Jim Liedeka, 1999, Dec 31

1. Feedback: Try this by Stephen Davies, 2000, Jan 05

27. Question: Help with an Ricoh ISA-to-PCMCIA bridge card by Jin Yang, 1999, Dec 31

1. Idea: Re: Help with an Ricoh ISA-to-PCMCIA bridge card by Ovidiu Predescu, 2000, Jan 14

28. Question: PCMCIA will not co-exist with CDROM by Stephen Davies, 2000, Jan 02

1. A possible fix by David Hinds, 2000, Jan 03

(_ Ok: That works:-)) by Stephen Davies, 2000, Jan 04

30. lockups on insertion or ejection by Jacek Polewczak, 2000, Jan 05

1. Re: lockups on insertion or ejection by David Hinds, 2000, Jan 06

32. Question: Sony Vaio PCG-N505VE Config by Tim Jones, 2000, Jan 10

1. System log messages help a lot by David Hinds, 2000, Jan 10

(_ Ok: Turns out PNP in BIOS the Problem by Tim Jones, 2000, Jan 13

34. Question: 3.1.8 not finding interrupts by Ian Soboroff, 2000, Jan 18

1. Other devices are using those interrupts by David Hinds, 2000, Jan 18

35. Sad: 3c574 and RH6.0 on a Compaq 1260.... by Peter J. Milanese, 2000, Jan 21

1. The usual request: system log messages? by David Hinds, 2000, Jan 21

36. Question: lock up with message "kmem_alloc: Bad slab magic (...)" after insmoding pcmcia_core by Tim Johann, 2000, Jan 26

1. Seems to be solved by David Hinds, 2000, Feb 11

42. Question: TP390X, 512MB, and PCMCIA by Andrew Newton, 2000, Feb 02

1. It's a flaky BIOS problem by David Hinds, 2000, Feb 09

(_ Sad: same problem, fixed, but now xircom card wont work by Dan Trevino, 2000, May 25

1. That doesn't make much sense by David Hinds, 2000, May 25

2. Idea: Actually you only did part of the fix by David Hinds, 2000, May 25

1. Ok: fixed by Dan Trevino, 2000, May 25

44. Question: Unresolved symbols vs configuration parameters in 2.3.42 by Peter, 2000, Feb 07

1. Question: Me too; please tell me exactly what you did by rjee@yahoo.com, 2000, Feb 08

(_ More: What I did by Peter, 2000, Feb 08

46. Warning: 3.1.10 does no longer work on DELL Inspiron 7500 by Ronny Bremer, 2000, Feb 11

1. Warning: 3.1.9 / 3.1.10 Broken for IBM ThinkPad i1460 by Kenny Jansson, 2000, Feb 15

(_ Note: PnP is enabled by Ronny Bremer, 2000, Feb 17

(_ Ok: tried beta, works :) by Ronny Bremer, 2000, Feb 25

47. Question: Compile-errors in 3.1.10 by Rolf Rander Naess, 2000, Feb 15

1. Some more info! by Rolf Rander Naess, 2000, Feb 15

2. You left out the part about a 2.3.* development kernel by David Hinds, 2000, Feb 15

1. Question: better combination? by Luis Villa, 2000, Feb 16

(_ Question: One other question by Luis Villa, 2000, Feb 16

(_ For post-2.3.36, you must use the modules from the kernel tree by David Hinds, 2000, Feb 17

48. Question: Card works in slot 1 but not slot 0 by John Ruttenberg, 2000, Feb 16

1. I'd want to see more information by David Hinds, 2000, Feb 16

49. Question: Problems with Netgear FA510 PCMCIA card on a Toshiba 4080 XCDT computer by Fred Mckenzie, 2000, Feb 18

1. Err, which of those is it? by David Hinds, 2000, Feb 18

50. Question: inb outb, compile failure with Redhat 6.1 please help. by ehlarson, 2000, Feb 20

51. Question: PCMCIA modem under Mandrake 7.0 by Chris Sleightholme, 2000, Feb 20

1. Bad drivers by David Hinds, 2000, Feb 20

52. Sad: Frustrations with kernel versions by ehlarson, 2000, Feb 21

1. It is a problem in the PCMCIA Configure script by David Hinds, 2000, Feb 21

(_ Configure Script ? by ehlarson, 2000, Feb 27

(_ I'll fix module placement; I disagree on the APM thing by David Hinds, 2000, Feb 28

53. Sad: Modules not compiling properly with 2.3.47 kernel and pcmcia-cs-3.1.11 . by Steven J. Hill, 2000, Feb 22

1. You can't build those modules on a 2.3.* kernel by David Hinds, 2000, Feb 22

54. Question: Problems installing 3.1.12 on Madrake 7.0 by jong chung, 2000, Feb 22

1. Missing "make" command?? by David Hinds, 2000, Feb 22

55. Warning: Toshiba Tecra 8100, 3.1.10 works, 3.1.11 fails by Roger E Critchlow Jr, 2000, Feb 22

1. Fixed in beta by David Hinds, 2000, Feb 22

(_ Agree: Yes, it's fixed. by Roger E Critchlow Jr, 2000, Feb 23

56. Sad: Pcmcia problems on Fujitsu lifebook (TI PCI1225) by Wolfgang Wegner, 2000, Feb 25

1. Memory window is too small by David Hinds, 2000, Feb 25

1. Feedback: Not yet... by Wolfgang Wegner, 2000, Feb 28

2. Ok: Seems to be solved...(Fujitsu C6325 now working) by Wolfgang Wegner, 2000, Mar 03

57. Sad: Problems with PCMCIA(TI 1225) on a Compaq Armada 1500C and SuSE 6.3 Kernel 2.2.13 by Knut-Perry G. Brumoen, 2000, Feb 25

1. It is a problem with SuSE 6.3 by David Hinds, 2000, Feb 25

(_ Sad: Nope... It wasn't that easy. by Knut-Perry G. Brumoen, 2000, Feb 25

(_ Re: Sad: Nope... It wasn't that easy. by David Hinds, 2000, Feb 25

(_ Already upgraded by Knut-Perry G. Brumoen, 2000, Feb 25

58. Question: Partial card functionality, memory port probs? by Ben hoyt, 2000, Feb 26

1. Maybe an IO port issue? by David Hinds, 2000, Feb 26

(_ More: IO Mapping by Ben hoyt, 2000, Feb 28

(_ Not a kernel issue; maybe timing? by David Hinds, 2000, Feb 28

(_ Clarification by Ben hoyt, 2000, Feb 28

59. Question: Install and config of Linksys desktop PCMRDWR reader writer and PCM100H1 card by Jeff Gembler, 2000, Feb 26

1. The reader is an ISA PnP device and needs to be activated by David Hinds, 2000, Feb 26

2. Question: Used pnpdump to produce isapnp.conf, still not there yet by Jeff Gembler, 2000, Mar 25

1. Dump the PCIC_OPTS; some things to check by David Hinds, 2000, Mar 25

2. Question: Changes to /etc/sysconfig/pcmcia and more I/O port information by Jeff Gembler, 2000, Mar 25

1. More things to try by David Hinds, 2000, Apr 04

3. Getting close, get two beeps on inserting PCMCIA card, but can't ping by Jeff Gembler, 2000, Apr 05

1. I think you're right: bad network configuration by David Hinds, 2000, Apr 05

4. Linksys PCM100H1 Ethernet connection works, but not HPNA by Jeff Gembler, 2000, Apr 05

1. For HPNA, you are in uncharted territory by David Hinds, 2000, Apr 05

2. Question: Can I do something to get HPNA to work ? by Jeff Gembler, 2000, Apr 06

1. I don't have any specs for the HomeLink by David Hinds, 2000, Apr 28

61. Question: Memory probe failures with kernels somewhat later 2.3.28 by Lutz, 2000, Feb 29

1. More: Problem no longer there... by Lutz, 2000, Mar 01

63. Sad: IRQ 11 wedged with 3.1.11/3.1.12 on Dell Inspiron 5000 by Scott Porter, 2000, Mar 10

1. The wedged irq is not the main problem, anyway by David Hinds, 2000, Mar 10

(_ Question: Was this ever resolved? by John Ruttenberg, 2000, Apr 02

64. Sad: System hangs when starting pcmcia service... by Eric Maes, 2000, Mar 12

1. Not interrupts: either IO ports or memory by David Hinds, 2000, Mar 13

(_ Feedback: Some progress... by Eric Maes, 2000, Mar 14

(_ Ok: OK now! by Eric Maes, 2000, Mar 15

65. Question: unknown PCI interrupt router 1106:0586 by Guillaum Dallaire, 2000, Mar 12

1. It seems to be a PCI problem, not a PCMCIA driver problem by David Hinds, 2000, Mar 13

66. Question: RH6.1 with 2.2.14 by Duane Gustavus, 2000, Mar 14

1. That's a new one by David Hinds, 2000, Mar 14

2. It was a filesystem permissions issue by David Hinds, 2000, Mar 15

3. Ok: Antec DataChute notes by Duane Gustavus, 2000, Mar 15

67. Sad: This has to be an easy one... by Chris Hobbs, 2000, Mar 16

1. What is the output of "make config"? by David Hinds, 2000, Mar 16

1. More: make config by Chris Hobbs, 2000, Mar 17

2. Ok: Solved by Chris Hobbs, 2000, Mar 17

68. Question: PCMCIA Problem with 3COM 3C562D/3C563D "eth0: interrupt(s) dropped" by John Auld, 2000, Mar 17

1. Dropped interrupts by David Hinds, 2000, Mar 17

(_ Hardware & Software details by John Auld, 2000, Mar 17

(_ Probably just an interrupt conflict by David Hinds, 2000, Mar 20

69. Question: Problem with TDK LAC-CD021AX by Kenji Takahashi, 2000, Mar 26

1. Your main problem is probably the 3.1.1 drivers by David Hinds, 2000, Mar 26

70. Sad: lucent ISA-PCMCIA adapter problems with aic78xx scsi driver by Douglas S. J. De Couto, 2000, Mar 27

1. More: no more disk problems.... by Douglas S. J. De Couto, 2000, Mar 28

(_ Actually this is a bug in the aic7xxx driver by David Hinds, 2000, Mar 30

71. Question: Xircom ISDN Creditcard by Ole andre, 2000, Mar 28

72. Sad: Pcmcia Token Ring Card Problem!... by Cesar Chavez, 2000, Mar 28

1. I think a driver upgrade might help by David Hinds, 2000, Mar 28

73. Question: redhat 6.0 -> 6.1 upgrade breaks pcmcia? by Michael Way, 2000, Mar 31

1. This is fixed in newer PCMCIA packages by David Hinds, 2000, Mar 31

74. Question: [Help] Cannot make the driver work on my laptop by Chih Wei Hsu, 2000, Mar 31

1. Not sure, but sounds like an interrupt probe problem by David Hinds, 2000, Mar 31

(_ Question: Re: "Not sure, but sounds like an interrupt probe problem" by Chih Wei Hsu, 2000, Mar 31

(_ I can't really tell what you're doing by David Hinds, 2000, Mar 31

75. Sad: eth0:interrupt(s) dropped! by Ray, 2000, Mar 31 (Moved)

76. Question: d-link dfe-660tx cardbus: eth0: Tx hung, 9 vs. 0. ?????? by Jochen Kirsch, 2000, Apr 02

1. Sad: still same symptoms... by Jochen Kirsch, 2000, Apr 03

1. Another thing to try by David Hinds, 2000, Apr 03

2. Sad: no luck... by Jochen Kirsch, 2000, Apr 03

3. Feedback: dump_pirq output by Jochen Kirsch, 2000, Apr 04

4. Feedback: "PCI irq 9 test failed" again... :- by Jochen Kirsch, 2000, Apr 05

1. Feedback: same problem by Lincoln Stein, 2000, Apr 19

5. Question: one last question by Jochen Kirsch, 2000, Apr 08

1. The card is not the problem by David Hinds, 2000, Apr 08

(_ Question: buggy cardbus bridge - consequence for other cards; workaround? by Jochen Kirsch, 2000, Apr 08

(_ I don't know by David Hinds, 2000, Apr 11

(_ ok by Jochen Kirsch, 2000, Apr 12

6. Sad: 25-Apr-00 beta results by Jochen Kirsch, 2000, Apr 26

1. Several issues by David Hinds, 2000, Apr 26

7. Feedback: 26-Apr-00 beta - results by Jochen Kirsch, 2000, Apr 27

1. Feedback: card insertions ok with 26-Apr-beta by Jochen Kirsch, 2000, Apr 27

8. Feedback: mii-tool results by Jochen Kirsch, 2000, Apr 28

77. Question: Modules don't install by Robert Dalrymple, 2000, Apr 07

1. The 2.3.* kernel stuff by David Hinds, 2000, Apr 07

78. Sad: pcmcia-cs-3.1.13 doesn't compile on 2.3.99-pre3 by Sean Harding, 2000, Apr 09

1. This is fixed in the current beta for 3.1.14 by David Hinds, 2000, Apr 10

82. Question: Problems Compiling 3.1.14 on 2.3.99-pre5 by Gordon Ross, 2000, Apr 21

1. Do "make config", then "make all" by David Hinds, 2000, Apr 21

83. Question: ISA adapter with Ricoh chipset by Matthias Kattanek, 2000, Apr 21

1. Sounds like an IO port scan failure by David Hinds, 2000, Apr 21

84. Question: PCI-PCMCIA can't get Interrupts (Wavelan's adapter) by Timothy Hamlin, 2000, Apr 21

1. More: PS - PCI chipset bx works, but not tx by Timothy Hamlin, 2000, Apr 24

2. PCI interrupt routing issues by David Hinds, 2000, Apr 25

85. Question: Compaq Laptop M700 hangs when card is inserted or ejected by Atanu Ghosh, 2000, Apr 22

1. Ok: BIOS was not providing PCI interrupt information by David Hinds, 2000, May 01

86. Question: PCIC probe failed (but worked fine yesterday) by Shiv Sikand, 2000, Apr 24

1. First thing to do: disable OSS and reboot by David Hinds, 2000, Apr 24

1. Re: disable OSS and reboot by Shiv Sikand, 2000, Apr 24

2. Ok: Problem resolved by David Hinds, 2000, Apr 24

87. Question: Need help setting up pcmcia-cs-3.1.13 on Linux Mandrake by Andrew Brackenbury, 2000, Apr 25

1. Hard to tell, but you may not need to do this at all by David Hinds, 2000, Apr 25

88. Question: Troubles with Vadem VG-469 - what am I doing wrong? by Andrey Soplevenko, 2000, Apr 26

1. Several possibilities by David Hinds, 2000, Apr 26

89. Question: Surecom PCMCIA Network Adapter by Roman Seidl, 2000, Apr 27

1. With a vendor driver, you should first check with that vendor by David Hinds, 2000, Apr 27

(_ Is the hyper.stanford package included with the current pcmcia drivers? by Roman Seidl, 2000, Apr 28

(_ It *is* the current pcmcia driver package by David Hinds, 2000, Apr 28

95. Question: Can any one assist in multi wvlan card compiliations or setups under linux2.2x by John Savage, 2000, May 04

96. Question: PCMCIA not working with a TI 1450 PCI-Cardbus by Paul Hayton, 2000, May 09

1. Note: Additional Information by Paul Hayton, 2000, May 09

2. Probably not a memory window issue by David Hinds, 2000, May 09

1. More: cardctl can see something.... by Paul Hayton, 2000, May 11

3. Ok: Success by Paul Hayton, 2000, May 31

98. Sad: Problem with Lucent PCI-PCMCIA adapter by Tommy Svensson, 2000, May 09

99. Question: Infinite interrupt loop with DataChute (i82365) by Matthew Kerr, 2000, May 10

1. News: One solution, more to come by Matthew Kerr, 2000, May 25

101. Question: What's the most trouble-free desktop PCMCIA interface? by Matthew Kerr, 2000, May 12

102. Sad: DataChute 'dies' and needs isapnp rerun by Matthew Kerr, 2000, May 15

103. Question: how to find a PC104 PCMCIA adapter? by c. chris erway, 2000, May 15

1. This dock should work by David Hinds, 2000, May 15

104. Question: PCMCIA modem unresponsive by Johan Mellberg, 2000, May 17 (Moved)

105. Question: Unresolved symbols installing pcmcia.12-May-00 under RedHat 6.2 by Michael Barton, 2000, May 18

1. Well, it is a beta, after all by David Hinds, 2000, May 18

106. Question: Using dhcpcd with pcmcia-cs by Uwe Hahn, 2000, May 20

1. Not in the boot scripts by David Hinds, 2000, May 22

107. Question: only one socket recognized on a machine with 2 Type II's by Jesse, 2000, May 20

1. This setup sounds strange to me by David Hinds, 2000, May 20

(_ Sad: things don't sound good if Hinds doesn't know... by Jesse, 2000, May 21

108. Question: Redhat 6.2 pcmcia boot disk by Joao Marques, 2000, May 21

1. Question: Untitled by Joao Marques, 2000, May 22

109. Sad: pcmcia-cs-3.1.13 and 15 can't cross-compile for powerpc by Tom Eden, 2000, May 22 (Moved)

111. pcmcia-3.1.14 - error during 'make all' .. by Rene Mikkelsen, 2000, Jun 01

1. This is not really a PCMCIA problem by David Hinds, 2000, Jun 01

(_ Sad: adding #include <asm/errno.h> seems to help.. by Rene Mikkelsen, 2000, Jun 01

112. Question: Adaptec 1480 SCSI not quite working, other PCMCIA does by S. Allen, 2000, Jun 06

1. Kernel compatibility issue: fixed in current drivers by David Hinds, 2000, Jun 06

(_ Question: Obvious that I am a newbie by S. Allen, 2000, Jun 07

(_ Wrong kernel source package by David Hinds, 2000, Jun 07

(_ Ok: SCSI working, now on to the next! Thanks by S. Allen, 2000, Jun 08

1. Note: A second issue, also by S. Allen, 2000, Jun 08

2. I think the driver side is all fine by David Hinds, 2000, Jun 08

113. Problem w/Thinkpad 390 by John Auer, 2000, Jun 07

1. It is a BIOS bug; there is a workaround by David Hinds, 2000, Jun 07

(_ That fixed one thing, the other is still broken by John Auer, 2000, Jun 07

(_ Ok: solved by John Auer, 2000, Jun 07

114. Question: Memory range suggestions for IBM 760EL by KC, 2000, Jun 11

1. I think your diagnosis is incorrect by David Hinds, 2000, Jun 12

115. Question: Help with PCMCIA 3.1.16 and kernel 2.2.16 by Dave Persing, 2000, Jun 13

1. Not sure: 2.2.16 works for me by David Hinds, 2000, Jun 14

2. Still not working... by Dave Persing, 2000, Jun 14

116. Ok: Fix for Dell I7K freezing on resume with 3.1.9+ by Piete Brooks, 2000, Jun 13

117. Question: Configuring ethernet card based on interface allocated by Paul Moore, 2000, Jun 14

1. Sure it's possible... by David Hinds, 2000, Jun 14

(_ Ok: Thanks - it's obvious now by Paul Moore, 2000, Jun 15

118. Sad: "Bad address mapping" on Sony N505VE by toby cabot, 2000, Jun 18

1. A strange problem by David Hinds, 2000, Jun 19

(_ Sad: you're not kidding by toby cabot, 2000, Jun 20

(_ Maybe a very particular hardware fault by David Hinds, 2000, Jun 20

(_ Agree: looks like you're right by toby cabot, 2000, Jun 21

119. Question: Cardbus interface in a desktop pc ? by Geir Thomassen, 2000, Jun 20

1. SCM makes a CardBus card reader by David Hinds, 2000, Jun 20

121. Question: 2.4 test2 and cs4232 by Brad Langhorst, 2000, Jun 29

1. You probably can't change this by David Hinds, 2000, Jul 05

123. Question: Problems with PCI-PCMCIA Adapter by Derek Sims, 2000, Jun 30

1. Should try newer drivers by David Hinds, 2000, Jul 05

124. Question: Seek laptop recommendation for 2 PCMCIA cards by A. N. Chari, 2000, Jul 01

1. I haven't heard of that sort of problem before by David Hinds, 2000, Jul 05

(_ Feedback: RE : problems with multiple cards by A. N. Chari, 2000, Jul 05

(_ Re: Feedback: RE : problems with multiple cards by David Hinds, 2000, Jul 05

125. Question: Lucent PCI bridge problems by Philippe Clérié, 2000, Jul 04

1. Ok: Untitled by Philippe Clérié, 2000, Jul 05

126. Question: cardinfo install by mike thomas, 2000, Jul 06

1. You've got the source code, at least by David Hinds, 2000, Jul 06

(_ Question: Untitled by mike thomas, 2000, Jul 07

(_ Re: Question: Untitled by David Hinds, 2000, Jul 07

(_ Ok: Success by mike thomas, 2000, Jul 07

127. Question: ADVICE: Configuring my PCMCIA GSM Modem by F, 2000, Jul 09 (Moved)

128. Warning: bug in Configure script for alternate root directory in 3.1.17 by Hughes MALPHETTES, 2000, Jul 11

1. Already fixed by David Hinds, 2000, Jul 11

129. Question: installing a Quatech spp-100 pcmcia card with 3.1.14 on kernel 2.3.99pre8 by clfletch@spawar.navy.mil, 2000, Jul 11

1. That combo won't work, for now by David Hinds, 2000, Jul 11

(_ Question: what combo will work with parport_cs driver by clfletch@spawar.navy.mil, 2000, Jul 16 (Moved)

130. Question: Orinoco/WaveLan ISA adapter -- problems on 486 w/2.0.35 kernel by David D. Johnson, 2000, Jul 13

1. "probe" isn't required for anything by David Hinds, 2000, Jul 13

(_ Ok: Re: "probe" isn't required for anything by David D. Johnson, 2000, Jul 13

131. Warning: 3.1.18 & Kernel 2.4.0-test4 by Alan Shutko, 2000, Jul 18

1. This should be fixed in the current beta by David Hinds, 2000, Jul 18

132. Question: install pcmcia on twinhead p79tx by liu liqun, 2000, Jul 20

1. More: Do not lockup now. But can not receive data. by liu liqun, 2000, Jul 21

1. Everything is not ok by David Hinds, 2000, Jul 21

2. One thing at a time... by David Hinds, 2000, Jul 21

3. More: Do it step by step by liu liqun, 2000, Jul 22

1. Work on this interrupt issue by David Hinds, 2000, Aug 01

4. Ok: It works by liu liqun, 2000, Aug 03

133. Sad: Wavelen(Lucent) PCI-PCMCIA adapter problems by Stuart Butterfield, 2000, Jul 27

1. Unknown interrupt router by David Hinds, 2000, Jul 27

1. Feedback: Re: Unknown interrupt router by Stuart Butterfield, 2000, Jul 28

(_ That is not a good sign by David Hinds, 2000, Jul 28

1. Agree: Yep, it's a PCI failure by Stuart Butterfield, 2000, Jul 31

2. Agree: Yep, it's a PCI failure by Stuart Butterfield, 2000, Jul 31

2. Note: Got another PCI adaptor working by Brian Candler, 2000, Jul 29

134. Question: i82365 and wvlan_cs with 2.4.0-test5? by Peter, 2000, Jul 29

1. If you want those modules, then turn off PCMCIA in your kernel by David Hinds, 2000, Jul 30

1. Ok: Cool, perhaps that could be made more clear in the HOWTO? by Peter, 2000, Jul 30

2. Question: Why ? by Serge Wagener, 2000, Aug 16

1. You can't just uncomment the config option by David Hinds, 2000, Aug 16

135. Question: IRQ problem with Ricoh R5C476II PCI-Cardbus bridge by Leonard Ye, 2000, Aug 06

136. Question: wvlan_cs and 2.4.0-test5 by Jon Lasser, 2000, Aug 07

137. Question: Unresolved symbols in pcmcia-cs-3.1.19 by Wenhua Xing, 2000, Aug 07

1. Don't load PCMCIA modules by hand by David Hinds, 2000, Aug 07

1. More: PCMCIA under pci-pcmcia bridge by Wenhua Xing, 2000, Aug 08

2. Question: Any conflict on this board? by Wenhua Xing, 2000, Aug 08

138. Question: Unknown memory size by Wenhua Xing, 2000, Aug 07

139. Question: Sycard PCChost 1200 supported? by Paul Graham, 2000, Aug 09

1. Yes, but there is a trick by David Hinds, 2000, Aug 09

(_ Question: Trick for IRQ's on Sycard PCChost 1200?? by Paul Graham, 2000, Aug 11

140. Question: Compilation doesn't create a /pcmcia directory, but no errors were reported by Pierre Bedel, 2000, Aug 09

1. Well, they are going somewhere by David Hinds, 2000, Aug 09

1. Sad: It must be some obvious mistake but I can't figure it out by Pierre Bedel, 2000, Aug 10

1. PREFIX setting by David Hinds, 2000, Aug 10

2. Ok: Problem solved by Pierre Bedel, 2000, Aug 10

141. Question: PCMCIA won't start (Kernel 2.4.0-test5, pcmcia-cs-3.1.20) by Talei McLeod, 2000, Aug 10

1. I don't think the PnP card has been activated by David Hinds, 2000, Aug 10

(_ Question: Now all my cards are being detected as "Anonymous Memory" by Talei McLeod, 2000, Aug 10

1. This is not a PnP issue by David Hinds, 2000, Aug 10

1. More: Here are my system log messages when I insert the WLAN card. by Talei McLeod, 2000, Aug 10

2. More: Some more detailed information about above problem. by Talei McLeod, 2000, Aug 10

3. More: I now have 1 card working. But not Compaq WLAN card. by Talei McLeod, 2000, Aug 11

142. Question: Problems with PCI to PCMCIA Adpater by Nicolas Malsch, 2000, Aug 10 (Moved)

143. Question: Something broke after test6-pre7 ( same for 3.1.18-20 ) by Philip Langdale, 2000, Aug 11

1. I don't know where the problem is by David Hinds, 2000, Aug 11

(_ Looks like it has been sorted out by David Hinds, 2000, Aug 11

(_ Re: Looks like it has been sorted out by Philip Langdale, 2000, Aug 12

144. Sad: Hang when inserting card on Sony VAIO Z505S by Liam Quinn, 2000, Aug 13

1. A driver upgrade may help by David Hinds, 2000, Aug 14

(_ Ok: Thanks, works great with pcmcia-cs-3.1.19 by Liam Quinn, 2000, Aug 14

145. Sad: Sony VAIO F-409: Bridge register mapping failed: check cb_mem_base by Serge Wagener, 2000, Aug 16

1. This is a kernel PCI bug by David Hinds, 2000, Aug 16

(_ Ok: New kernel really solved the problem by Serge Wagener, 2000, Aug 17

146. Question: What is the deal with pcmcia and 2.4 kernels by Henrik Nordstrom, 2000, Aug 20

1. Here is a draft of a new README about 2.4 by David Hinds, 2000, Aug 21

147. Question: Misidentifying 'D-Link DFE-650' as 'KTI Ether-C16' by William Crandall, 2000, Aug 22 (Moved)

148. Question: Which driver for a KXL-810 external scsi cdrom? by Tom Halladay, 2000, Aug 26

1. Not sure if this installation method is supported by David Hinds, 2000, Aug 28

(_ Tried Mandrake and Redhat by Tom Halladay, 2000, Aug 28

149. Question: "no valid ROM images found"? by Darin Davis, 2000, Sep 01

1. I think this is a memory window problem by David Hinds, 2000, Sep 01

(_ More: You're a genius! by Darin Davis, 2000, Sep 01

(_ The latest beta might have some effect by David Hinds, 2000, Sep 01

[ Add Message ]  to: "PCMCIA Installation and Configuration Issues"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]