I checked their web site and it appears that the PCM-3115B uses a Vadem VG-468 chipset, which is supported by the linux drivers. I've had people tell me they've used PC104 cards with VG-468 chipsets, as well as Cirrus PD672x chipsets, successfully. I have not kept track of specific vendors and product codes. What happens when you load the Linux PCMCIA drivers? Does the i82365 module fail out with a "not found" message? There is only one setting that is relevant for this type of controller: the i365_base parameter has to point to the card's base IO address, which is normally 0x3e0. The documentation for the PCM-3115B should indicate if there are any jumpers for configuring the IO address. -- Dave |