[ Next-in-Thread ]  [ Next Message ] 

This dock should work 

Forum: PCMCIA Installation and Configuration Issues
Re: Question: how to find a PC104 PCMCIA adapter? (c. chris erway)
Date: 2000, May 15
From: David Hinds <dhinds@pcmcia.sourceforge.org> 

I checked their web site and it appears that the PCM-3115B uses a
Vadem VG-468 chipset, which is supported by the linux drivers.

I've had people tell me they've used PC104 cards with VG-468 chipsets,
as well as Cirrus PD672x chipsets, successfully.  I have not kept
track of specific vendors and product codes.

What happens when you load the Linux PCMCIA drivers?  Does the i82365
module fail out with a "not found" message?  There is only one setting
that is relevant for this type of controller: the i365_base parameter
has to point to the card's base IO address, which is normally 0x3e0.
The documentation for the PCM-3115B should indicate if there are any
jumpers for configuring the IO address.

-- Dave

[ Next-in-Thread ]  [ Next Message ] 

Select this message: This dock should work

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]