Next-in-Thread Next Message

Question only one socket recognized on a machine with 2 Type II's 

Forum: PCMCIA Installation and Configuration Issues
Date: 2000, May 20
From: Jesse calig007

Hi - I have been trying to get PCMCIA support up and running
with Caldera OpenLinux, build 2.0.35 -- right now only socket
0 is even being recognized. An excerpt from the boot messages 
is :

Intel PCIC Probe
  VIA VT83C469 at port 0x3e0 ofs 0x00, 1 socket
  host opts [0]: ring
  ISA irqs (scanned) = 3,4,5,7,9,11,12 status change on irq 11

I have CD-ROM successfully mounted on socket 0. Any ideas on 
what is keeping socket 1 from getting seen? Thanks in advance 
- Jesse

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None This setup sounds strange to me by David Hinds, 2000, May 20
(_ Sad things don't sound good if Hinds doesn't know... by Jesse, 2000, May 21

Add Message to: "only one socket recognized on a machine with 2 Type II's"

Members Subscribe Admin Mode Show Frames Help for HyperNews at 1.10