Next-in-Thread Next Message

Question only one socket recognized on a machine with 2 Type II's 

Forum: PCMCIA Installation and Configuration Issues
Date: 2000, May 20
From: Jesse calig007

Hi - I have been trying to get PCMCIA support up and running
with Caldera OpenLinux, build 2.0.35 -- right now only socket
0 is even being recognized. An excerpt from the boot messages 
is :

Intel PCIC Probe
  VIA VT83C469 at port 0x3e0 ofs 0x00, 1 socket
  host opts [0]: ring
  ISA irqs (scanned) = 3,4,5,7,9,11,12 status change on irq 11

I have CD-ROM successfully mounted on socket 0. Any ideas on 
what is keeping socket 1 from getting seen? Thanks in advance 
- Jesse

Next-in-Thread Next Message

Select this message: only one socket recognized on a machine with 2 Type II's

Messages Inline: 1 All Outline: 2 3 All

1. None This setup sounds strange to me by David Hinds, 2000, May 20
... 1 Message(s)

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at 1.10
[ Edit This Forum ]