Question: only one socket recognized on a machine with 2 Type II's 

Forum: PCMCIA Installation and Configuration Issues
Date: 2000, May 20
From: Jesse calig007

Hi - I have been trying to get PCMCIA support up and running with Caldera OpenLinux, build 2.0.35 -- right now only socket 0 is even being recognized. An excerpt from the boot messages is : . . . Intel PCIC Probe VIA VT83C469 at port 0x3e0 ofs 0x00, 1 socket host opts [0]: ring ISA irqs (scanned) = 3,4,5,7,9,11,12 status change on irq 11 . . . I have CD-ROM successfully mounted on socket 0. Any ideas on what is keeping socket 1 from getting seen? Thanks in advance - Jesse

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 1 ]  [ All ]  Outline: [ 2 ]  [ 3 ]  [ All ] 

1. This setup sounds strange to me by David Hinds, 2000, May 20

... 1 Message(s)

[ Add Message ]  to: "only one socket recognized on a machine with 2 Type II's"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]