This setup sounds strange to me 

Forum: PCMCIA Installation and Configuration Issues
Re: Question: only one socket recognized on a machine with 2 Type II's (Jesse)
Date: 2000, May 20
From: David Hinds <dhinds@pcmcia.sourceforge.org>

So... what kind of machine is this, exactly? You can try specifying PCIC_OPTS="extra_sockets=1" in your PCMCIA startup options (/etc/sysconfig/pcmcia for Red Hat). I'm not sure how else the probe could misdetect the number of sockets. -- Dave

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 0 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

Sad: things don't sound good if Hinds doesn't know... Re: This setup sounds strange to me (David Hinds) Date: 2000, May 21 From: Jesse calig007

I put the extra_sockets=1 in /etc/sysconfig/pcmcia, but rebooting the system got me the same messages. I used to use this laptop with Win 95 and both slots. The computer is a AST Ascentia 910N (486DX4/75Mhz 8Mb + 4Mb addition module). Linux is build 2.0.35, Caldera Openlinux 1.3. Thanks for your help- Jesse

[ Add Message ]  to: "This setup sounds strange to me"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]