Question: Memory range suggestions for IBM 760EL 

Forum: PCMCIA Installation and Configuration Issues
Date: 2000, Jun 11
From: KC KC

Hi, I am using kernel 2.2.10 with PCMCIA Card services 3.0.14. Trying to install two PC cards (IBM Credit Card II and 3Com Megahertz) but only one works when installed. Separately, they work fine. PCMCIA HOWTO's indicated resource issue and looking at the sys logs, it is specific for memory windows. I have tried a WIDE variety of memory inclusions but I can still only get one to work when both are installed. The latest sys log indicates: (socket 0 = IBM CC II) Initializing socket 0 Memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff Memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff warning: no high memory space available! Memory probe 0x0d0000-0x0dffff: excluding 0x0d0000-0x0dffff Memory probe 0x0c0000-0x0cffff: excluding 0x0c0000-0x0cffff socket 0: Anonymous Memory . . Memroy_cs: mem0: anonymjous: unknown size executing: './memory start mem0 Then Socket 1 initialized successfully with the 3Com PC lan card. Any suggestion on the ranges that I can try for this combination??? Thanks in advance!!

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 0 ]  [ 1 ] 

I think your diagnosis is incorrect Re: Question: Memory range suggestions for IBM 760EL (KC) Date: 2000, Jun 12 From: David Hinds <dhinds@pcmcia.sourceforge.org>

It is almost definitely not a memory window issue. It is 99% likely an interrupt issue. Undo whatever you've done to the default memory settings. The defaults work fine on a 760EL; I have one myself. There is a section in the PCMCIA-HOWTO about exactly this situation; see section 3.9, "Resource conflict only with two cards inserted". -- Dave

[ Add Message ]  to: "Memory range suggestions for IBM 760EL"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]