Next-in-Thread Next Message

Sad you're not kidding 

Forum: PCMCIA Installation and Configuration Issues
Re: Sad "Bad address mapping" on Sony N505VE (toby cabot)
Re: None A strange problem (David Hinds)
Date: 2000, Jun 20
From: toby cabot toby

Dave,

It sure is a strange problem. I can't for the life of me figure out what changed between "working fine" for the last five months since the machine was new and "FUBAR" now. I've tried warm-booting from Windows, cold boot, remove battery and power then re-boot, and nothing seems to work (except for win98, which works fine, which really pisses me off).

I scanned my messages log and found that the bridge mapping used to be 0x68000000 when things were working. So I tried setting the cb_mem_base to 0x68000000 but then get "Bad bridge mapping at 0x680000dc!".

I've also tried kernel 2.2.16 with pcmcia-cs 3.1.16 with the same results.

I looked for BIOS upgrades on the Sony website and no luck.

I guess I could try a pre-2.4 kernel but I'm not usually that cutting-edge.

Regards,
Toby

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 3 All

1. None Maybe a very particular hardware fault by David Hinds, 2000, Jun 20
(_ Agree looks like you're right by toby cabot, 2000, Jun 21

Add Message to: "you're not kidding"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10