Next-in-Thread Next Message

None Maybe a very particular hardware fault 

Forum: PCMCIA Installation and Configuration Issues
Re: Sad "Bad address mapping" on Sony N505VE (toby cabot)
Re: None A strange problem (David Hinds)
Re: Sad you're not kidding (toby cabot)
Date: 2000, Jun 20
From: David Hinds <dhinds@pcmcia.sourceforge.org>

> I scanned my messages log and found that the bridge mapping used to be
> 0x68000000 when things were working. So I tried setting the cb_mem_base
> to 0x68000000 but then get "Bad bridge mapping at 0x680000dc!".

This smells like a hardware failure.  The PCMCIA drivers are writing
0x68000000 to a register, and it is reading back as 0x680000dc.  Maybe
Windows works because it only writes to this register and never relies
on reading it back.

Just for kicks, you could try editing modules/i82365.c, find the line
that says:

 pci_readl(s, PCI_BASE_ADDRESS_0, &s->cb_phys);

and add right after that:

 s->cb_phys &= ~0x0fff;

-- Dave

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. Agree looks like you're right by toby cabot, 2000, Jun 21

Add Message to: "Maybe a very particular hardware fault"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10