Next-in-Thread Next Message

Question No Power on Sycard PCChost 1200? 

Forum: PCMCIA Installation and Configuration Issues
Date: 1999, Nov 25
From: Patrick Osterloh p_osterloh

I just migrated from a Sycard PCChost 1100 Bridge with a TI 1131 socket controller to a Sycard PCChost 1200 Bridge with a TI 1220 socket controller on board. The problem is: The new Bridge does not power up its sockets. I can trace the problem down to the on board socket power switch. For some reasons this device is not powering up the sockets. Does anyone share this experience with me?

David: Is the the TI 1220 supported by the current software version?



Next-in-Thread Next Message

Select this message: No Power on Sycard PCChost 1200?

Messages Inline: 1 All Outline: 1 2 All

1. Warning Patch for TI1220 on Sycard´s PCChost1200 PCI-Cardbus Adapter by Patrick Osterloh, 1999, Nov 28

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at 1.10
[ Edit This Forum ]