Next-in-Thread Next Message

Question 2.4 test2 and cs4232 

Forum: PCMCIA Installation and Configuration Issues
Date: 2000, Jun 29
From: Brad Langhorst bwlang

I've just installed 2.4test2 on my redhat 6.2 system I compiled PCMCIA into the kernel. Card services seems to work just fine but it is camping out on irq 5

/proc/interrupts  says
 ...
 5:    0     XT-PIC  Texas Insturments PCI1250
 ...
 11:   3456  XT-PIC  Texas Instruments PCI1250

Since my crystal audio 4232 must use irq5 I want to move card services to 10 (which is not listed in /proc/interrupts). However when i add

 PCIC_OPTS= "cs_irq=10 irq_list=11"

to /etc/sysconfig/pcmcia nothing changes. I also tried

 PCIC_OPTS= "pci_csc=1 pci_int=1 do_scan=1 irq_list=11"

also to no avail

any suggestions?

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None You probably can't change this by David Hinds, 2000, Jul 05

Add Message to: "2.4 test2 and cs4232"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10