2.4 test2 and cs4232

Question: 2.4 test2 and cs4232

Forum: PCMCIA Installation and Configuration Issues
Date: 2000, Jun 29
From: Brad Langhorst bwlang

I've just installed 2.4test2 on my redhat 6.2 system I compiled PCMCIA into the kernel. Card services seems to work just fine but it is camping out on irq 5

/proc/interrupts says ... 5: 0 XT-PIC Texas Insturments PCI1250 ... 11: 3456 XT-PIC Texas Instruments PCI1250

Since my crystal audio 4232 must use irq5 I want to move card services to 10 (which is not listed in /proc/interrupts). However when i add

PCIC_OPTS= "cs_irq=10 irq_list=11"

to /etc/sysconfig/pcmcia nothing changes. I also tried

PCIC_OPTS= "pci_csc=1 pci_int=1 do_scan=1 irq_list=11"

also to no avail
any suggestions?

[ Next-in-Thread ] [ Next Message ]

Select this message: 2.4 test2 and cs4232

Messages Inline: [ 1 ] [ All ] Outline: [ 1 ] [ 2 ] [ All ]

1. You probably can't change this by David Hinds, 2000, Jul 05

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ] [ Subscribe ] [ No Admin Mode ]
[ Show Frames ] [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]
[ Edit This Forum ]