[ Next-in-Thread ]  [ Next Message ] 

Feedback: RE : problems with multiple cards 

Forum: PCMCIA Installation and Configuration Issues
Re: Question: Seek laptop recommendation for 2 PCMCIA cards (A. N. Chari)
Re: I haven't heard of that sort of problem before (David Hinds)
Date: 2000, Jul 05
From: A. N. Chari chari

Hi Dave, 

	Thanks for getting back to me.

I tried setting "poll_interval=100", and also separately restricting the irq_list to the interrupts reported as unused in /proc/interrupts, and combinations of these, as you suggested in the HOWTO, but my Toshiba 1625 still fails to configure both cards. The first inserted card does okay, but the second one generates "RequestIRQ : Resource in use". 

	Same problem with Compaq Presario 1925.

	With Toshiba 2180CDT, both cards worked after I downloaded the pcmcia3.1.17 version (which is now installed on all three)

	Any suggestions would be much appreciated.

	Thanks again,

-Chari.

[ Next-in-Thread ]  [ Next Message ] 

Select this message: RE : problems with multiple cards

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. Re: Feedback: RE : problems with multiple cards by David Hinds, 2000, Jul 05

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]