Lucent PCI bridge problems

Question: Lucent PCI bridge problems

Forum: PCMCIA Installation and Configuration Issues
Date: 2000, Jul 04
From: Philippe Clérié pclerie

Hi everyone:
I am having a difficult time installing a Lucent WavelanIEEE card. I am stuck because an irq test failed. Previous attempts with pcmcia-cs 3.1.13 failed with "unknown PCI interrupt router".
I have tried several options mentionned in some of the messages on this forum and none works. Specifically, it does not matter what irq_mode value I use. No irq_list has worked. I also tried cb_pci_irq=11. Always the same results.
The computer is an AcerPower Sn with RedHat 6.0. Hope someone can give me a clue.
Thanks, Philippe

From /var/log/messages ======================== Linux PCMCIA Card Services 3.1.17 kernel build: 2.2.5-15 #1 Mon Apr 19 21:39:28 EDT 1999 options: [pci] [cardbus] [apm] [pnp] PCI routing table version 1.0 at 0xf7900 PnP: PNP BIOS installation structure at 0xc00f5f50 PnP: PNP BIOS version 1.0, entry at f9e00:0, dseg at f0000 Intel PCIC probe: TI 1225 rev 01 PCI-to-CardBus at slot 00:10, mem 0x68000000 host opts [0]: [pci only] [pci irq 11] [lat 168/176] [bus 0/34] host opts [1]: [pci only] [pci irq 11] [lat 168/176] [bus 0/37] PCI irq 11 test failed *NO* card interrupts, polling interval = 1000 ms cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: clean. cs: IO port probe 0x0a00-0x0aff: clean.

Dump_irq ========= Interrupt routing table found at address 0xf7900: Version 1.0, size 0x00a0 Interrupt router is device 00:07.0 PCI exclusive interrupt mask: 0x0000 Compatible router: vendor 0x10b9 device 0x1533

Device 00:01.0 (slot 0): INTA: link 0x01, irq mask 0x1ef8 INTB: link 0x02, irq mask 0x1ef8 INTC: link 0x03, irq mask 0x1ef8 INTD: link 0x04, irq mask 0x1ef8

Device 00:0b.0 (slot 0): INTA: link 0x04, irq mask 0x1ef8

Device 00:02.0 (slot 0): INTA: link 0x59, irq mask 0x1ef8

Device 00:0f.0 (slot 0):
Device 00:03.0 (slot 0):

Device 00:14.0 (slot 1): INTA: link 0x01, irq mask 0x1ef8 INTB: link 0x02, irq mask 0x1ef8 INTC: link 0x03, irq mask 0x1ef8 INTD: link 0x04, irq mask 0x1ef8

Device 00:13.0 (slot 2): INTA: link 0x02, irq mask 0x1ef8 INTB: link 0x03, irq mask 0x1ef8 INTC: link 0x04, irq mask 0x1ef8 INTD: link 0x01, irq mask 0x1ef8

Device 00:10.0 (slot 3): INTA: link 0x03, irq mask 0x1ef8 INTB: link 0x04, irq mask 0x1ef8 INTC: link 0x01, irq mask 0x1ef8 INTD: link 0x02, irq mask 0x1ef8

Interrupt router at 00:07.0: AcerLabs Aladdin M1533 PCI-to-ISA bridge INT1 (link 1): irq 9 INT2 (link 2): irq 10 INT3 (link 3): irq 11 INT4 (link 4): irq 5 INT5 (link 5): unrouted INT6 (link 6): unrouted INT7 (link 7): unrouted INT8 (link 8): unrouted Serial IRQ: [disabled] [quiet] [frame=21] [pulse=12]

[ Next-in-Thread ] [ Next Message ]

Select this message: Lucent PCI bridge problems

Messages Inline: [ 1 ] [ All ] Outline: [ 1 ] [ 2 ] [ All ]

1. Ok: Untitled by Philippe Clérié, 2000, Jul 05

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ] [ Subscribe ] [ No Admin Mode ]
[ Show Frames ] [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]
[ Edit This Forum ]