"probe" isn't required for anything 

Forum: PCMCIA Installation and Configuration Issues
Re: Question: Orinoco/WaveLan ISA adapter -- problems on 486 w/2.0.35 kernel (David D. Johnson)
Date: 2000, Jul 13
From: David Hinds <dhinds@pcmcia.sourceforge.org>

Do you happen to know if any of your ISA hardware is likely to conflict with the PCMCIA card reader at IO address 0x3e0? > I checked lsmod, and the i82365 and ds modules were loaded. If the i82365 module is loaded, check "dmesg" to see what it had to say about your card reader. The only purpose for running "probe" is to identify your PCMCIA card reader, but if you already know the i82365 driver is working, then that is moot. -- Dave

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 0 ]  [ 1 ] 

Ok: Re: "probe" isn't required for anything Re: "probe" isn't required for anything (David Hinds) Date: 2000, Jul 13 From: David D. Johnson ddj

David Hinds wrote: > Do you happen to know if any of your ISA hardware is likely to > conflict with the PCMCIA card reader at IO address 0x3e0? It looks clean -- net cards at 0240/0340, scsi at 330, and vga at 3c0. The i82365 showed up at 03e2/03e3. Here is the dmesg output: ---------------- Linux PCMCIA Card Services 3.1.18 kernel build: 2.0.35 #14 Thu May 6 09:05:12 EDT 1999 options: [pci] [apm] Intel PCIC probe: Vadem VG-469 rev 00 ISA host opts [0]: none host opts [1]: none ISA irqs (scanned) = 3,4,7,9,10,12 status change on irq 10 cs: IO port probe 0x0100-0x03ff: excluding 0x1c8-0x1cf 0x200-0x207 0x240-0x25f 0x340-0x34f 0x378-0x37f cs: IO port probe 0x0a20-0x0a27: clean. cs: memory probe 0x0d0000-0x0dffff: excluding 0xdc000-0xddfff cs: memory probe 0x0c0000-0x0cffff: excluding 0xc0000-0xc7fff ---------------- So, this looks ok to me.... Time to poke at the PC card. Thanks for the help, -- ddj

[ Add Message ]  to: ""probe" isn't required for anything"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]