"probe" isn't required for anything

Forum: PCMCIA Installation and Configuration Issues
Re: Question: Orinoco/WaveLan ISA adapter -- problems on 486 w/2.0.35 kernel (David D. Johnson)
Date: 2000, Jul 13
From: David Hinds <dhinds@pcmcia.sourceforge.org>

Do you happen to know if any of your ISA hardware is likely to conflict with the PCMCIA card reader at IO address 0x3e0? > I checked lsmod, and the i82365 and ds modules were loaded. If the i82365 module is loaded, check "dmesg" to see what it had to say about your card reader. The only purpose for running "probe" is to identify your PCMCIA card reader, but if you already know the i82365 driver is working, then that is moot. -- Dave

[ Next-in-Thread ] [ Next Message ]

Select this message: "probe" isn't required for anything

Messages Inline: [ 1 ] [ All ] Outline: [ 1 ] [ 2 ] [ All ]

1. Ok: Re: "probe" isn't required for anything by David D. Johnson, 2000, Jul 13

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ] [ Subscribe ] [ No Admin Mode ]
[ Show Frames ] [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]
[ Edit This Forum ]