Next-in-Thread Next Message

Ok Re: "probe" isn't required for anything 

Forum: PCMCIA Installation and Configuration Issues
Re: Question Orinoco/WaveLan ISA adapter -- problems on 486 w/2.0.35 kernel (David D. Johnson)
Re: None "probe" isn't required for anything (David Hinds)
Date: 2000, Jul 13
From: David D. Johnson ddj

David Hinds wrote:
> Do you happen to know if any of your ISA hardware is likely to
> conflict with the PCMCIA card reader at IO address 0x3e0?
It looks clean -- net cards at 0240/0340, scsi at 330,
and vga at 3c0.  The i82365 showed up at 03e2/03e3.

Here is the dmesg output:
Linux PCMCIA Card Services 3.1.18
  kernel build: 2.0.35 #14 Thu May 6 09:05:12 EDT 1999
  options:  [pci] [apm]
Intel PCIC probe: 
  Vadem VG-469 rev 00 ISA
    host opts [0]: none
    host opts [1]: none
    ISA irqs (scanned) = 3,4,7,9,10,12 status change on irq 10
cs: IO port probe 0x0100-0x03ff: excluding 0x1c8-0x1cf 0x200-0x207 0x240-0x25f 0x340-0x34f 0x378-0x37f
cs: IO port probe 0x0a20-0x0a27: clean.
cs: memory probe 0x0d0000-0x0dffff: excluding 0xdc000-0xddfff
cs: memory probe 0x0c0000-0x0cffff: excluding 0xc0000-0xc7fff

So, this looks ok to me....  Time to poke at the PC card.
Thanks for the help,

	-- ddj

Next-in-Thread Next Message

Add Message to: "Re: "probe" isn't required for anything"

Members Subscribe Admin Mode Show Frames Help for HyperNews at 1.10