|
I installed redhat 6.2 on my twinhead p79tx (about two years
old). The PCMCIA control IC is TI PCI1131. I try to use
a xircom creditcard ethernet card on my laptop.
Under win98, all the hardware work well.
Under win98,
the IRQ for the net card is 11, port 1000-100f, mem 02003000
to 02003fff , 02004000-02004ff
the IRQ for the PCI1131 is 10, mem 02000000-02000fff, 02003000
-02004fff.
the mem for card service is 02001000-02001fff
At first, I let the linux probe the information for me. But it lock up at boot time. I set the PCIC_OPTS="irq_list=10,11" in /etc/sysconfig/pcmcia and exclude all the irq except 10 ,11 in config.opt. The system still lock up at boot time. I find this in the log file. Jul 19 00:36:02 newstart pcmcia: Starting PCMCIA services: Jul 19 00:36:03 newstart pcmcia: modules Jul 19 00:36:03 newstart kernel: Linux PCMCIA Card Services 3.1.8 Jul 19 00:36:03 newstart kernel: kernel build: 2.2.14-5.0 #1 Tue Mar 7 20:53:41 EST 2000 Jul 19 00:36:03 newstart kernel: options: [pci] [cardbus] [apm] Jul 19 00:36:03 newstart pcmcia: /lib/modules/2.2.14-5.0/pcmcia/i82365.o: Jul 19 00:36:03 newstart pcmcia: invalid parameter parm_irq-LIST Jul 19 00:36:03 newstart kernel: ds: no socket drivers loaded! Jul 19 00:36:03 newstart pcmcia: cardmgr. Jul 19 00:36:03 newstart pcmcia: /lib/modules/2.2.14-5.0/pcmcia/ds.o: init_module: Device or resource busy Jul 19 00:36:03 newstart rc: Starting pcmcia succeeded Jul 19 00:36:03 newstart cardmgr[414]: starting, version is 3.1.8 Jul 19 00:36:03 newstart cardmgr[414]: no pcmcia driver in /proc/devices Jul 19 00:36:03 newstart cardmgr[414]: exiting Then I set the do_scan=0,include the new mem window (0x68000000-0x68000fff). the system can not boot too. If I remove the card from the socket, the system can boot successfuly. But I will lock again after I inset the card. Below is waht I found in the log file.
Jul 20 03:10:49 newstart pcmcia: Starting PCMCIA services: Jul 20 03:10:49 newstart pcmcia: modules Jul 20 03:10:49 newstart kernel: Linux PCMCIA Card Services 3.1.8 Jul 20 03:10:49 newstart kernel: kernel build: 2.2.14-5.0 #1 Tue Mar 7 20:53:41 EST 2000 Jul 20 03:10:49 newstart kernel: options: [pci] [cardbus] [apm] Jul 20 03:10:49 newstart kernel: Intel PCIC probe: Jul 20 03:10:49 newstart kernel: TI 1131 PCI-to-CardBus at bus 0 slot 15, mem 0x68000000, 2 sockets Jul 20 03:10:49 newstart kernel: host opts [0]: [pci + serial irq] [no pci irq] [lat 64/176] [bus 1/5] Jul 20 03:10:49 newstart kernel: host opts [1]: [pci + serial irq] [no pci irq] [lat 64/176] [bus 6/10] Jul 20 03:10:49 newstart kernel: ISA irqs (default) = 3,4,7,9,10,11,12 polling interval = 1000 ms Jul 20 03:10:49 newstart pcmcia: cardmgr. Jul 20 03:10:49 newstart cardmgr[431]: starting, version is 3.1.8 Jul 20 03:10:49 newstart rc: Starting pcmcia succeeded Jul 20 03:10:50 newstart cardmgr[431]: watching 2 sockets Jul 20 03:10:50 newstart kernel: cs: IO port probe 0x1000-0x17ff: clean. Jul 20 03:10:50 newstart kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x378-0x37f 0x398-0x39f 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7 Jul 20 03:10:50 newstart inet: inetd startup succeeded Can you tell me what shall I do next?
|
Messages