Next-in-Thread Next Message

More Do not lockup now. But can not receive data.  

Forum: PCMCIA Installation and Configuration Issues
Re: Question install pcmcia on twinhead p79tx (liu liqun)
Date: 2000, Jul 21
From: liu liqun happydog

I set the PCIC_IPT="irq_mod=3", then everything seem ok. But I can not still receive any data from my xircom CE3B network card. I ping the local gateway and see the yellow LED twinkle. But all the packets are losed.

Below are the log file entries.

Jul 21 14:23:05 newstart pcmcia: Starting PCMCIA services:
Jul 21 14:23:05 newstart pcmcia:  modules
Jul 21 14:23:05 newstart kernel: Linux PCMCIA Card Services 3.1.8 
Jul 21 14:23:05 newstart kernel:   kernel build: 2.2.14-5.0 #1 Tue Mar 7 20:53:41 EST 2000 
Jul 21 14:23:05 newstart kernel:   options:  [pci] [cardbus] [apm] 
Jul 21 14:23:05 newstart kernel: Intel PCIC probe:  
Jul 21 14:23:05 newstart kernel:   TI 1131 PCI-to-CardBus at bus 0 slot 15, mem 0x68000000, 2 sockets 
Jul 21 14:23:05 newstart kernel:     host opts [0]: [serial pci & irq] [no pci irq] [lat 64/176] [bus 1/5] 
Jul 21 14:23:05 newstart kernel:     host opts [1]: [serial pci & irq] [no pci irq] [lat 64/176] [bus 6/10] 
Jul 21 14:23:05 newstart kernel:     ISA irqs (default) = 3,4,7,9,10,11,12 polling interval = 1000 ms 
Jul 21 14:23:05 newstart pcmcia:  cardmgr.
Jul 21 14:23:05 newstart cardmgr[460]: starting, version is 3.1.8
Jul 21 14:23:05 newstart rc: Starting pcmcia succeeded
Jul 21 14:23:06 newstart cardmgr[460]: watching 2 sockets
Jul 21 14:23:06 newstart kernel: cs: IO port probe 0x1000-0x17ff: clean. 
Jul 21 14:23:06 newstart cardmgr[460]: initializing socket 1
Jul 21 14:23:06 newstart kernel: cs: memory probe 0x68000000-0x68ffffff: excluding 0x68000000-0x680fffff 
Jul 21 14:23:06 newstart cardmgr[460]: socket 1: Xircom CE3-10/100 Fast Ethernet
Jul 21 14:23:06 newstart inet: inetd startup succeeded
Jul 21 14:23:06 newstart cardmgr[460]: executing: 'insmod /lib/modules/2.2.14-5.0/pcmcia/xirc2ps_cs.o'
Jul 21 14:23:06 newstart kernel: xirc2ps_cs.c 1.31 1998/12/09 19:32:55 (dd9jn+kvh) 
Jul 21 14:23:06 newstart kernel: eth0: Xircom: port 0x1300, irq 11, hwaddr 00:80:C7:48:AA:A6 
Jul 21 14:23:06 newstart cardmgr[460]: executing: './network start eth0'
Jul 21 14:23:09 newstart kernel: eth0: MII link partner: 0021 
Jul 21 14:23:09 newstart kernel: eth0: MII selected 
Jul 21 14:23:09 newstart kernel: eth0: media 10BaseT, silicon revision 4 

Waht is wrong? should I compile the newer pcmcia code?

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None Everything is not ok by David Hinds, 2000, Jul 21

Add Message to: "Do not lockup now. But can not receive data. "

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10