More: Do not lockup now. But can not receive data.  

Forum: PCMCIA Installation and Configuration Issues
Re: Question: install pcmcia on twinhead p79tx (liu liqun)
Date: 2000, Jul 21
From: liu liqun happydog

I set the PCIC_IPT="irq_mod=3", then everything seem ok. But I can not still receive any data from my xircom CE3B network card. I ping the local gateway and see the yellow LED twinkle. But all the packets are losed. Below are the log file entries. Jul 21 14:23:05 newstart pcmcia: Starting PCMCIA services: Jul 21 14:23:05 newstart pcmcia: modules Jul 21 14:23:05 newstart kernel: Linux PCMCIA Card Services 3.1.8 Jul 21 14:23:05 newstart kernel: kernel build: 2.2.14-5.0 #1 Tue Mar 7 20:53:41 EST 2000 Jul 21 14:23:05 newstart kernel: options: [pci] [cardbus] [apm] Jul 21 14:23:05 newstart kernel: Intel PCIC probe: Jul 21 14:23:05 newstart kernel: TI 1131 PCI-to-CardBus at bus 0 slot 15, mem 0x68000000, 2 sockets Jul 21 14:23:05 newstart kernel: host opts [0]: [serial pci & irq] [no pci irq] [lat 64/176] [bus 1/5] Jul 21 14:23:05 newstart kernel: host opts [1]: [serial pci & irq] [no pci irq] [lat 64/176] [bus 6/10] Jul 21 14:23:05 newstart kernel: ISA irqs (default) = 3,4,7,9,10,11,12 polling interval = 1000 ms Jul 21 14:23:05 newstart pcmcia: cardmgr. Jul 21 14:23:05 newstart cardmgr[460]: starting, version is 3.1.8 Jul 21 14:23:05 newstart rc: Starting pcmcia succeeded Jul 21 14:23:06 newstart cardmgr[460]: watching 2 sockets Jul 21 14:23:06 newstart kernel: cs: IO port probe 0x1000-0x17ff: clean. Jul 21 14:23:06 newstart cardmgr[460]: initializing socket 1 Jul 21 14:23:06 newstart kernel: cs: memory probe 0x68000000-0x68ffffff: excluding 0x68000000-0x680fffff Jul 21 14:23:06 newstart cardmgr[460]: socket 1: Xircom CE3-10/100 Fast Ethernet Jul 21 14:23:06 newstart inet: inetd startup succeeded Jul 21 14:23:06 newstart cardmgr[460]: executing: 'insmod /lib/modules/2.2.14-5.0/pcmcia/xirc2ps_cs.o' Jul 21 14:23:06 newstart kernel: xirc2ps_cs.c 1.31 1998/12/09 19:32:55 (dd9jn+kvh) Jul 21 14:23:06 newstart kernel: eth0: Xircom: port 0x1300, irq 11, hwaddr 00:80:C7:48:AA:A6 Jul 21 14:23:06 newstart cardmgr[460]: executing: './network start eth0' Jul 21 14:23:09 newstart kernel: eth0: MII link partner: 0021 Jul 21 14:23:09 newstart kernel: eth0: MII selected Jul 21 14:23:09 newstart kernel: eth0: media 10BaseT, silicon revision 4 Waht is wrong? should I compile the newer pcmcia code?

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 0 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

Everything is not ok Re: More: Do not lockup now. But can not receive data. (liu liqun) Date: 2000, Jul 21 From: David Hinds <dhinds@pcmcia.sourceforge.org>

It doesn't work because "irq_mode=3" is wrong for this system. -- Dave

[ Add Message ]  to: "Do not lockup now. But can not receive data. "

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]