[ Next-in-Thread ]  [ Next Message ] 

More: Do not lockup now. But can not receive data.  

Forum: PCMCIA Installation and Configuration Issues
Re: Question: install pcmcia on twinhead p79tx (liu liqun)
Date: 2000, Jul 21
From: liu liqun happydog

I set the PCIC_IPT="irq_mod=3", then everything seem ok. But I can not still receive any data from my xircom CE3B network card. I ping the local gateway and see the yellow LED twinkle. But all the packets are losed.

Below are the log file entries. 

Jul 21 14:23:05 newstart pcmcia: Starting PCMCIA services:
Jul 21 14:23:05 newstart pcmcia:  modules
Jul 21 14:23:05 newstart kernel: Linux PCMCIA Card Services 3.1.8 
Jul 21 14:23:05 newstart kernel:   kernel build: 2.2.14-5.0 #1 Tue Mar 7 20:53:41 EST 2000 
Jul 21 14:23:05 newstart kernel:   options:  [pci] [cardbus] [apm] 
Jul 21 14:23:05 newstart kernel: Intel PCIC probe:  
Jul 21 14:23:05 newstart kernel:   TI 1131 PCI-to-CardBus at bus 0 slot 15, mem 0x68000000, 2 sockets 
Jul 21 14:23:05 newstart kernel:     host opts [0]: [serial pci & irq] [no pci irq] [lat 64/176] [bus 1/5] 
Jul 21 14:23:05 newstart kernel:     host opts [1]: [serial pci & irq] [no pci irq] [lat 64/176] [bus 6/10] 
Jul 21 14:23:05 newstart kernel:     ISA irqs (default) = 3,4,7,9,10,11,12 polling interval = 1000 ms 
Jul 21 14:23:05 newstart pcmcia:  cardmgr.
Jul 21 14:23:05 newstart cardmgr[460]: starting, version is 3.1.8
Jul 21 14:23:05 newstart rc: Starting pcmcia succeeded
Jul 21 14:23:06 newstart cardmgr[460]: watching 2 sockets
Jul 21 14:23:06 newstart kernel: cs: IO port probe 0x1000-0x17ff: clean. 
Jul 21 14:23:06 newstart cardmgr[460]: initializing socket 1
Jul 21 14:23:06 newstart kernel: cs: memory probe 0x68000000-0x68ffffff: excluding 0x68000000-0x680fffff 
Jul 21 14:23:06 newstart cardmgr[460]: socket 1: Xircom CE3-10/100 Fast Ethernet
Jul 21 14:23:06 newstart inet: inetd startup succeeded
Jul 21 14:23:06 newstart cardmgr[460]: executing: 'insmod /lib/modules/2.2.14-5.0/pcmcia/xirc2ps_cs.o'
Jul 21 14:23:06 newstart kernel: xirc2ps_cs.c 1.31 1998/12/09 19:32:55 (dd9jn+kvh) 
Jul 21 14:23:06 newstart kernel: eth0: Xircom: port 0x1300, irq 11, hwaddr 00:80:C7:48:AA:A6 
Jul 21 14:23:06 newstart cardmgr[460]: executing: './network start eth0'
Jul 21 14:23:09 newstart kernel: eth0: MII link partner: 0021 
Jul 21 14:23:09 newstart kernel: eth0: MII selected 
Jul 21 14:23:09 newstart kernel: eth0: media 10BaseT, silicon revision 4

Waht is wrong? should I compile the newer pcmcia code?

[ Next-in-Thread ]  [ Next Message ] 

Select this message: Do not lockup now. But can not receive data.

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. Everything is not ok by David Hinds, 2000, Jul 21

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]