Next-in-Thread Next Message

More Do it step by step 

Forum: PCMCIA Installation and Configuration Issues
Re: Question install pcmcia on twinhead p79tx (liu liqun)
Date: 2000, Jul 22
From: liu liqun happydog

1. default config.opts and /etc/sysconfig/pcmcia can not boot not matter has or not has card in the socket.

2. set do_scan=0
 2.1 has card in the socket.
 The laptop gives a high beep and display PCMCIA [OK], then  lockup. The log is:
Jul 22 03:50:33 newstart pcmcia: Starting PCMCIA services:
Jul 22 03:50:33 newstart pcmcia:  modules
Jul 22 03:50:33 newstart kernel: Linux PCMCIA Card Services 3.1.8 
Jul 22 03:50:33 newstart kernel:   kernel build: 2.2.14-5.0 #1 Tue Mar 7 20:53:41 EST 2000 
Jul 22 03:50:33 newstart kernel:   options:  [pci] [cardbus] [apm] 
Jul 22 03:50:33 newstart kernel: Intel PCIC probe:  
Jul 22 03:50:33 newstart kernel:   TI 1131 PCI-to-CardBus at bus 0 slot 15, mem 0x68000000, 2 sockets 
Jul 22 03:50:33 newstart kernel:     host opts [0]: [pci + serial irq] [no pci irq] [lat 64/176] [bus 1/5] 
Jul 22 03:50:33 newstart kernel:     host opts [1]: [pci + serial irq] [no pci irq] [lat 64/176] [bus 6/10] 
Jul 22 03:50:33 newstart kernel:     ISA irqs (default) = 3,4,7,9,10,11,12 polling interval = 1000 ms 
Jul 22 03:50:33 newstart pcmcia:  cardmgr.
Jul 22 03:50:33 newstart rc: Starting pcmcia succeeded

 2.2 no card in the socket.
 can boot, But lockup again after insert the card.
the log is:
Jul 22 03:53:13 newstart pcmcia: Starting PCMCIA services:
Jul 22 03:53:13 newstart pcmcia:  modules
Jul 22 03:53:14 newstart kernel: Linux PCMCIA Card Services 3.1.8 
Jul 22 03:53:14 newstart kernel:   kernel build: 2.2.14-5.0 #1 Tue Mar 7 20:53:41 EST 2000 
Jul 22 03:53:14 newstart kernel:   options:  [pci] [cardbus] [apm] 
Jul 22 03:53:14 newstart kernel: Intel PCIC probe:  
Jul 22 03:53:14 newstart kernel:   TI 1131 PCI-to-CardBus at bus 0 slot 15, mem 0x68000000, 2 sockets 
Jul 22 03:53:14 newstart kernel:     host opts [0]: [pci + serial irq] [no pci irq] [lat 64/176] [bus 1/5] 
Jul 22 03:53:14 newstart kernel:     host opts [1]: [pci + serial irq] [no pci irq] [lat 64/176] [bus 6/10] 
Jul 22 03:53:14 newstart kernel:     ISA irqs (default) = 3,4,7,9,10,11,12 polling interval = 1000 ms 
Jul 22 03:53:14 newstart pcmcia:  cardmgr.
Jul 22 03:53:14 newstart rc: Starting pcmcia succeeded
Jul 22 03:53:14 newstart cardmgr[466]: starting, version is 3.1.8
Jul 22 03:53:14 newstart cardmgr[466]: watching 2 sockets
Jul 22 03:53:14 newstart kernel: cs: IO port probe 0x1000-0x17ff: clean. 
Jul 22 03:53:14 newstart kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x378-0x37f 0x398-0x39f 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7 

....

Jul 22 03:59:02 newstart cardmgr[466]: initializing socket 1
Jul 22 03:59:02 newstart cardmgr[466]: socket 1: Xircom CE3-10/100 Fast Ethernet
Jul 22 03:59:02 newstart kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. 
Jul 22 03:59:02 newstart cardmgr[466]: executing: 'insmod /lib/modules/2.2.14-5.0/pcmcia/xirc2ps_cs.o'
Jul 22 03:59:02 newstart kernel: xirc2ps_cs.c 1.31 1998/12/09 19:32:55 (dd9jn+kvh) 

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None Work on this interrupt issue by David Hinds, 2000, Aug 01

Add Message to: "Do it step by step"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10