[ Next-in-Thread ]  [ Next Message ] 

More: Do it step by step 

Forum: PCMCIA Installation and Configuration Issues
Re: Question: install pcmcia on twinhead p79tx (liu liqun)
Date: 2000, Jul 22
From: liu liqun happydog

1. default config.opts and /etc/sysconfig/pcmcia can not boot not matter has or not has card in the socket. 

2. set do_scan=0
 2.1 has card in the socket.
 The laptop gives a high beep and display PCMCIA [OK], then  lockup. The log is:
Jul 22 03:50:33 newstart pcmcia: Starting PCMCIA services:
Jul 22 03:50:33 newstart pcmcia:  modules
Jul 22 03:50:33 newstart kernel: Linux PCMCIA Card Services 3.1.8 
Jul 22 03:50:33 newstart kernel:   kernel build: 2.2.14-5.0 #1 Tue Mar 7 20:53:41 EST 2000 
Jul 22 03:50:33 newstart kernel:   options:  [pci] [cardbus] [apm] 
Jul 22 03:50:33 newstart kernel: Intel PCIC probe:  
Jul 22 03:50:33 newstart kernel:   TI 1131 PCI-to-CardBus at bus 0 slot 15, mem 0x68000000, 2 sockets 
Jul 22 03:50:33 newstart kernel:     host opts [0]: [pci + serial irq] [no pci irq] [lat 64/176] [bus 1/5] 
Jul 22 03:50:33 newstart kernel:     host opts [1]: [pci + serial irq] [no pci irq] [lat 64/176] [bus 6/10] 
Jul 22 03:50:33 newstart kernel:     ISA irqs (default) = 3,4,7,9,10,11,12 polling interval = 1000 ms 
Jul 22 03:50:33 newstart pcmcia:  cardmgr.
Jul 22 03:50:33 newstart rc: Starting pcmcia succeeded

 2.2 no card in the socket.
 can boot, But lockup again after insert the card.
the log is:
Jul 22 03:53:13 newstart pcmcia: Starting PCMCIA services:
Jul 22 03:53:13 newstart pcmcia:  modules
Jul 22 03:53:14 newstart kernel: Linux PCMCIA Card Services 3.1.8 
Jul 22 03:53:14 newstart kernel:   kernel build: 2.2.14-5.0 #1 Tue Mar 7 20:53:41 EST 2000 
Jul 22 03:53:14 newstart kernel:   options:  [pci] [cardbus] [apm] 
Jul 22 03:53:14 newstart kernel: Intel PCIC probe:  
Jul 22 03:53:14 newstart kernel:   TI 1131 PCI-to-CardBus at bus 0 slot 15, mem 0x68000000, 2 sockets 
Jul 22 03:53:14 newstart kernel:     host opts [0]: [pci + serial irq] [no pci irq] [lat 64/176] [bus 1/5] 
Jul 22 03:53:14 newstart kernel:     host opts [1]: [pci + serial irq] [no pci irq] [lat 64/176] [bus 6/10] 
Jul 22 03:53:14 newstart kernel:     ISA irqs (default) = 3,4,7,9,10,11,12 polling interval = 1000 ms 
Jul 22 03:53:14 newstart pcmcia:  cardmgr.
Jul 22 03:53:14 newstart rc: Starting pcmcia succeeded
Jul 22 03:53:14 newstart cardmgr[466]: starting, version is 3.1.8
Jul 22 03:53:14 newstart cardmgr[466]: watching 2 sockets
Jul 22 03:53:14 newstart kernel: cs: IO port probe 0x1000-0x17ff: clean. 
Jul 22 03:53:14 newstart kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x378-0x37f 0x398-0x39f 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7

.... 

Jul 22 03:59:02 newstart cardmgr[466]: initializing socket 1
Jul 22 03:59:02 newstart cardmgr[466]: socket 1: Xircom CE3-10/100 Fast Ethernet
Jul 22 03:59:02 newstart kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. 
Jul 22 03:59:02 newstart cardmgr[466]: executing: 'insmod /lib/modules/2.2.14-5.0/pcmcia/xirc2ps_cs.o'
Jul 22 03:59:02 newstart kernel: xirc2ps_cs.c 1.31 1998/12/09 19:32:55 (dd9jn+kvh)

[ Next-in-Thread ]  [ Next Message ] 

Select this message: Do it step by step

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. Work on this interrupt issue by David Hinds, 2000, Aug 01

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Members ]  [ Subscribe ]  [ No Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ] 
[ Edit This Forum ]