[ Next-in-Thread ]  [ Next Message ] 

Work on this interrupt issue 

Forum: PCMCIA Installation and Configuration Issues
Re: Question: install pcmcia on twinhead p79tx (liu liqun)
Re: More: Do it step by step (liu liqun)
Date: 2000, Aug 01
From: David Hinds <dhinds@pcmcia.sourceforge.org> 

Ok, if do_scan=0 helps, then I'd replace it with things like:

  PCIC_OPTS="irq_list=3,4,7,9,10"
  PCIC_OPTS="irq_list=3,4,7,11,12"
  PCIC_OPTS="irq_list=3,4,7"

until you can get the system to boot cleanly.  One or more interrupts
is causing a problem at boot time; it also might be the cause of the
problem when you insert your card.

It might also be a good idea to upgrade to the latest (3.1.19) PCMCIA
driver package.

-- Dave

[ Next-in-Thread ]  [ Next Message ] 

[ Add Message ]  to: "Work on this interrupt issue"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]